Sam Anand

Sam Anand

Professor

Professor, Director - Siemens PLM Simulation Technology Center

Rhodes Hall

697

CEAS - Mechanical Eng - 0072

Professional Summary

Research and Teaching Interests: Intelligent Design, Manufacturing Systems Optimization, Modelling and Optimization of Additive and Subtractive Manufacturing, Industrial Internet of Things (IIoT), Augmented Reality

Education

Bachelor of Science: University of Madras Madras, India, 1982 (Mechanical Engineering)

Master of Engineering: Indian Institute of Science 1984 (Mechanical Engineering)

Master of Science: The Pennsylvania State University College Park, Penn., 1987 (Industrial Engineering)

PhD : The Pennsylvania State University College Park, Penn., 1990 (Industrial Engineering)

Research and Practice Interests

  • Additive Manufacturing (AM)/ Layered Manufacturing (LM)
  • Optimization of Manufacturing Processes & Systems
  • Precision Engineering
  • Tolerancing & Computational Metrology
  • Design & Product Life Cycle Management

Research Support

Investigators:Anand, Sundararaman 05-18-2021 -12-23-2021 Raytheon Company CAD Based Computational Tools for Metal Powder Additive Manufacturing - Phase II Role:PI 172404.00 Hold Level:Industry

Grant: #Raytheon 1256773 Investigators:Anand, Sundararaman 06-15-2020 -12-11-2020 Raytheon Company CAD Based Computational Tools for Metal Additive Manufacturing Role:PI $86,245.00 Awarded Level:Industry

Grant: #221-01 / W15QKN-19-3-0003 Investigators:Anand, Sundararaman; Kumar, Manish 01-29-2020 -01-31-2022 Department of the Army Real-Time Sealant Deposition Monitoring for Automated Process Quality Control using Computer Vision, Image Processing methods and Deep Learning Role:PI 150654.52 Active Level:Federal

Grant: #SOCHE RX13-UC-19-2 sub ODHE Investigators:Anand, Sundararaman; Vemaganti, Kumar 08-25-2019 -08-25-2020 Ohio Department of Higher Education Bayesian Topology Optimization Techniques for Additive Manufacturing Role:Collaborator $52,260.00 Awarded Level:State of Ohio

Grant: #EAA16-02-06 Investigators:Anand, Sundararaman; Kumar, Manish 03-24-2017 -03-24-2018 Department of the Army Non-Invasive Computer Vision Toolkit for Legacy Machines using MTConnect (UI Labs / DMDII) Role:PI $376,902.00 Awarded Level:Federal

Grant: #N000215962 Investigators:Anand, Sundararaman 11-01-2016 -09-01-2017 Department of Energy Design for Additive Manufacturability Role:PI $123,520.00 Active Level:Federal

Grant: #15-07-05 Investigators:Anand, Sundararaman 10-01-2016 -05-31-2018 Department of the Army Multidisciplinary Toolset to Virtually Qualify Part Design and Process for Metal Powder-Bed Additive Role:PI $35,000.00 Active Level:Federal

Grant: #UDRI RSC16103 sub WSARC WSARC-1077-400 sub ODHE Investigators:Anand, Sundararaman 09-19-2016 -08-18-2018 Ohio Department of Higher Education Tailorable Thermal Expansion Structures through Innovative Lattice Structures Role:PI $50,008.00 Active Level:State of Ohio

Grant: #Membership Agreement / W31P4Q-14-2-0001 Investigators:Anand, Sundararaman; Huang, Hongdao Samuel; Kim, J.; Lee, Jay; Meenakshi, Sundaram Murali; Vemaganti, Kumar 01-01-2015 -12-31-2019 Department of Defense Digital Manufacturing and Design Innovation (DMDI) - Intelligent Machining Role:Collaborator $.00 Awarded Level:Federal

Grant: #DUE-1141120 Investigators:Anand, Sundararaman; Huang, Hongdao Samuel; Kumar, Manish 05-01-2012 -04-30-2014 National Science Foundation Seamless Transition Form Academia to Real-World (STAR): A Collaborative Partnership to Producing Industry Ready Graduates Role:Collaborator $199,999.00 Active Level:Federal

Grant: #P&G Master Alliance Agreement Investigators:Anand, Sundararaman 03-05-2012 -06-30-2014 Procter & Gamble Company Assembly Innovation-Assembly Analysis and Optimization of the P&G Baby Care Converter Line Role:PI $408,825.00 Active Level:Industry

Grant: #SRS 007934 Investigators:Anand, Sundararaman 02-07-2012 -09-30-2013 Procter & Gamble Company Design and Development of Machine Design Documentation Standards (MDDS) System Role:PI $59,014.00 Active Level:Industry

Grant: #SRS 007681 Investigators:Anand, Sundararaman 07-24-2011 -10-24-2011 Reliance Medical Products Inc. Optimal Design of Medical Device using Design for Manufacturability and Assembly (DFMA) Approach Role:PI $15,049.00 Closed Level:Industry

Grant: #SRS 007354 Investigators:Anand, Sundararaman 02-04-2011 -08-05-2011 Procter & Gamble Company Optimal Frame Design Using Design for Low Cost Approach Role:PI $56,856.00 Closed Level:Industry

Grant: #G4P-45U1781217 Investigators:Anand, Sundararaman 10-04-2010 -07-10-2011 Procter & Gamble Company Design and Development of Machine Design and Documentation Standards System Role:PI $61,781.00 Closed Level:Industry

Grant: #SRS 006673 Investigators:Anand, Sundararaman 01-01-2010 -07-10-2011 Procter & Gamble Company Design and Analysis of a Diaper Folding Mechanism Role:PI $198,718.00 Closed Level:Industry

Grant: #SRS 006277 Investigators:Anand, Sundararaman 07-01-2009 -06-30-2011 Procter & Gamble Company Design for Low Cost (DFLC) Approach for Unit Ops and Feature Frames at P&G Role:PI $274,576.00 Closed Level:Industry

Grant: #4501391052 Investigators:Anand, Sundararaman 04-20-2009 -06-30-2009 Procter & Gamble Company Investigation of Transitioning of P&G's Design Operations to Siemens PLM NX Role:PI $20,090.00 Closed Level:Industry

Grant: #P&G DFM Study Investigators:Anand, Sundararaman 06-16-2008 -06-30-2009 Procter & Gamble Company Feasibility Study of Applying Design for Manufacturing (DFM) Approaches to Low Cost Equipment Sourcing at Procter & Gamble Role:PI $162,219.00 Closed Level:Industry

Grant: #Alltech, Inc. Investigators:Anand, Sundararaman 02-01-2008 -09-15-2008 Alltech, Inc. Concept Testing and Validation of Automation Solutions for a Solid State Fermentation Plant Role:PI $132,908.00 Closed Level:Industry

Grant: #TAA Investigators:Anand, Sundararaman 04-01-2006 -01-31-2007 Alltech, Inc. Automation of Manufacturing Processes of a Solid State Fermentation Plant Role:PI $99,175.00 Closed Level:Industry

Grant: #Letter Agreement Investigators:Anand, Sundararaman 10-01-2005 -01-31-2006 Cincinnati Sub-Zero Products, Inc. Analysis and Redesign of a Cutting Press for Medical Blankets Role:PI $22,637.00 Closed Level:Industry

Grant: #Letter Investigators:Anand, Sundararaman 09-15-2005 -01-15-2006 General Tool Company Optimization of Manufacturing Methods and Processes at a Job Shop Using Computer Simulation Role:PI $19,158.00 Closed Level:Industry

Grant: #DMI-0231790 NCE Investigators:Anand, Sundararaman 09-01-2002 -08-31-2004 National Science Foundation An Integrated Approach to Prediction, Assessment and Inspection of Form Errors in Machined Parts Role:PI $75,134.00 Closed Level:Federal

Grant: #738452 NCE Investigators:Anand, Sundararaman 01-01-2001 -06-30-2004 Ohio Board of Regents World Class Manufacturing Education Role:PI $250,000.00 Closed Level:State of Ohio

Grant: #OSP01105 Investigators:Anand, Sundararaman 07-01-2000 -06-30-2001 Health Alliance of Greater Cincinnati Benchmarking and Productivity Improvement Role:PI $56,240.00 Closed Level:Private Non-Profit

Grant: #PO 0020001174 Investigators:Anand, Sundararaman 02-01-2000 -07-31-2000 Ford Motor Company Analysis and Design of a Machine Tool Pallet Register System Role:PI $35,814.00 Closed Level:Industry

Grant: #95X1850 Investigators:Anand, Sundararaman 09-01-1999 -06-30-2001 Department of Labor Dislocated Worker Manufacturing Technology Demonstration Program Role:PI $810,620.00 Closed Level:Federal

Grant: #OSP99143 Investigators:Anand, Sundararaman 12-14-1998 -07-15-1999 Select Tool and Die Corporation Plant Layout and Simulation-Based Improvement of Manufacturing Functions at a Metal Stamping Facility Role:PI $40,653.00 Closed Level:Industry

Grant: #PO 5189149-000 Investigators:Anand, Sundararaman 04-01-1998 -06-30-2000 Health Alliance of Greater Cincinnati Benchmarking and Productivity Improvement Role:PI $92,240.00 Closed Level:Private Non-Profit

Grant: #RAPIDS 5 Investigators:Anand, Sundararaman; Cahay, Marc; Ellis, Jennifer; Ma, Ou; Riley, Susan; Rybicki, Frank 10-01-2021 -09-30-2023 Ohio Department of Higher Education Post-Secondary Workforce Development for Increased Use of Robotics, Additive Manufacturing, and Augmented/Virtual Reality in the Healthcare and Manufacturing Industries Role:Collaborator 308752.00 Hold Level:Ohio, State of

Grant: #W912HZ-21-BAA-01 Investigators:Anand, Sundararaman; Khare, Prashant 05-01-2022 -04-30-2023 Department of the Army Phase 1 Lightweight Machine Learning Based Intelligent Design of Heat Exchangers for Additive Manufacturing Role:PI 0.00 Hold Level:Federal

Investigators:Anand, Sundararaman; Kumar, Manish 07-20-2022 -07-19-2027 MME Industry 4.0/5.0 Institute MME INDUSTRY 4.0/5.0 INSTITUTE Role:Collaborator 0.00 Hold Level:UC's Internal Funds

Investigators:Anand, Sundararaman; Kumar, Manish 07-15-2022 -07-14-2023 Innovative Numerics MEMBERSHIP AGREEMENT INNOVATIVE NUMERICS /Membership Fees Role:Collaborator 12000.00 Hold Level:Industry

Investigators:Anand, Sundararaman; Kumar, Manish 06-13-2022 -06-12-2023 Deere & Company MEMBERSHIP AGREEMENT JOHN DEERE Role:Collaborator 40000.00 Hold Level:Industry

Investigators:Anand, Sundararaman; Kumar, Manish 07-27-2022 -07-26-2023 Stress Engineering Services, Inc. MEMBERSHIP AGREEMENT STRESS ENGINEERING SERVICES/Membership Fees Role:Collaborator 12000.00 Hold Level:Industry

Investigators:Anand, Sundararaman; Kumar, Manish 09-05-2022 -09-04-2023 Ethicon Endo Surgery, Incorporated MEMBERSHIP AGREEMENT ETHICON ENDO-SURGERY INC Role:Collaborator 12000.00 Hold Level:Industry

Investigators:Anand, Sundararaman; Kumar, Manish 10-01-2022 -09-30-2023 MME Industry 4.0/5.0 Institute MEMBERSHIP AGREEMENT SIEMENS Role:Collaborator 40000.00 Hold Level:UC's Internal Funds

Publications

Peer Reviewed Publications

Anand S.;Ghalsasi O.;Zhang B.;Goel A.;Reddy S.;Joshi S.;Morris G. (01-29-2019. ) Additive manufacturing simulation tools in education.2018 World Engineering Education Forum - Global Engineering Deans Council, WEEF-GEDC 2018, , More Information

Zhang B.;Goel A.;Ghalsasi O.;Anand S. (01-01-2019. ) CAD-based design and pre-processing tools for additive manufacturing.Journal of Manufacturing Systems, , More Information

Samant R.;Ranjan R.;Mhapsekar K.;Anand S. (08-01-2018. ) Octree data structure for support accessibility and removal analysis in additive manufacturing.Additive Manufacturing, , 22 ,618-633 More Information

Mhapsekar K.;McConaha M.;Anand S. (05-01-2018. ) Additive Manufacturing Constraints in Topology Optimization for Improved Manufacturability.Journal of Manufacturing Science and Engineering, Transactions of the ASME, , 140 (5 ) , More Information

Chowdhury S.;Mhapsekar K.;Anand S. (03-01-2018. ) Part Build Orientation Optimization and Neural Network-Based Geometry Compensation for Additive Manu.Journal of Manufacturing Science and Engineering, Transactions of the ASME, , 140 (3 ) , More Information

Anand S. (01-01-2018. ) Geometric dimensioning and tolerancing in additive manufacturing .Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, , 24-28

McConaha M.;Zhang B.;Venugopal V.;Anand S. (01-01-2018. ) Multi objective DFAM constrained topology optimization for additive manufacturing .Proceedings - 2018 ASPE and euspen Summer Topical Meeting: Advancing Precision in Additive Manufacturing, , 35-39

Das P.;Mhapsekar K.;Chowdhury S.;Samant R.;Anand S. (11-10-2017. ) Selection of build orientation for optimal support structures and minimum part errors in additive ma.Computer-Aided Design and Applications, , 14 ,1-13 More Information

Ranjan R.;Samant R.;Anand S. (06-01-2017. ) Integration of Design for Manufacturing Methods with Topology Optimization in Additive Manufacturing.Journal of Manufacturing Science and Engineering, Transactions of the ASME, , 139 (6 ) , More Information

Joshi A.;Anand S. (01-01-2017. ) Geometric Complexity Based Process Selection for Hybrid Manufacturing.Procedia Manufacturing, , 10 ,578-589 More Information

Zhang B.;Mhapsekar K.;Anand S. (01-01-2017. ) Design of variable-density structures for additive manufacturing using gyroid lattices.Proceedings of the ASME Design Engineering Technical Conference, , 4 , More Information

Vaidya R.;Anand S. (01-01-2016. ) Optimum Support Structure Generation for Additive Manufacturing Using Unit Cell Structures and Suppo.Procedia Manufacturing, , 5 ,1043-1059 More Information

Vaidya R.;Anand S. (01-01-2016. ) Image Processing Assisted Tools for Pre- and Post-processing Operations in Additive Manufacturing.Procedia Manufacturing, , 5 ,958-973 More Information

Chowdhury S.;Anand S. (01-01-2016. ) Artificial neural network based geometric compensation for thermal deformation in additive manufactu.ASME 2016 11th International Manufacturing Science and Engineering Conference, MSEC 2016, , 3 , More Information

Zha W.;Anand S. (10-01-2015. ) Geometric approaches to input file modification for part quality improvement in additive manufacturi.Journal of Manufacturing Processes, , 20 ,465-477 More Information

Paul R.;Anand S. (01-01-2015. ) Optimization of layered manufacturing process for reducing form errors with minimal support structur.Journal of Manufacturing Systems, , 36 ,231-243 More Information

Paul R.;Anand S. (01-01-2015. ) A combined energy and error optimization method for metal powder based additive manufacturing proces.Rapid Prototyping Journal, , 21 (3 ) ,301-312 More Information

Paul R.;Anand S. (01-01-2015. ) A new Steiner patch based file format for Additive Manufacturing processes.CAD Computer Aided Design, , 63 ,86-100 More Information

Siraskar N.;Paul R.;Anand S. (01-01-2015. ) Adaptive slicing in additive manufacturing process using a modified boundary octree data structure.Journal of Manufacturing Science and Engineering, Transactions of the ASME, , 137 (1 ) , More Information

Ranjan R.;Samant R.;Anand S. (01-01-2015. ) Design for manufacturability in additive manufacturing using a graph based approach.ASME 2015 International Manufacturing Science and Engineering Conference, MSEC 2015, , 1 , More Information

Das P.;Chandran R.;Samant R.;Anand S. (01-01-2015. ) Optimum Part Build Orientation in Additive Manufacturing for Minimizing Part Errors and Support Stru.Procedia Manufacturing, , 1 ,343-354 More Information

Huang S.;Anand S.;Kumar M.;Castaneda-Emenaker I. (01-01-2015. ) A virtual company-based integrated learning methodology to produce industry ready graduate .ASEE Annual Conference and Exposition, Conference Proceedings, , 122nd ASEE Annual Conference and Exposition: Makin (122nd ASEE Annual Conference and Exposition: Makin ) ,

Panhalkar N.;Paul R.;Anand S. (12-01-2014. ) Increasing Part Accuracy in Additive Manufacturing Processes Using a k-d Tree Based Clustered Adapti.Journal of Manufacturing Science and Engineering, Transactions of the ASME, , 136 (6 ) , More Information

Panhalkar N.;Anand S. (01-01-2014. ) Component shape library and toolpath optimization in printed electronics .Technical Paper - Society of Manufacturing Engineers, , TP14PUB72 ,

Turek S.;Anand S. (01-01-2014. ) A graph-based method for the application and quantification of design for assembly (DFA) knowledge i .Transactions of the North American Manufacturing Research Institution of SME, , 42 (January ) ,114-123

Panhalkar N.;Paul R.;Anand S. (01-01-2014. ) Optimization of Automobile Assembly Process to Reduce Assembly Time.Computer-Aided Design and Applications, , 11 ,54-60 More Information

Paul R.;Anand S.;Gerner F. (01-01-2014. ) Effect of thermal deformation on part errors in metal powder based additive manufacturing processes.Journal of Manufacturing Science and Engineering, Transactions of the ASME, , 136 (3 ) , More Information

Paul R.;Anand S. (12-01-2013. ) Material shrinkage modeling and form error prediction in additive manufacturing processes .Transactions of the North American Manufacturing Research Institution of SME, , 41 ,515-525

Allavarapu S.;Paul R.;Anand S. (12-01-2013. ) A new additive manufacturing file format using bezier patches .Transactions of the North American Manufacturing Research Institution of SME, , 41 ,580-590

Panhalkar N.;Paul R.;Anand S. (12-01-2013. ) Adaptive layering in additive manufacturing using a k-d tree approach .Transactions of the North American Manufacturing Research Institution of SME, , 41 ,591-599

Huang S.;Anand S.;Sundaram M.;Kumar M. (12-01-2013. ) EXPLORES: An integrated learning environment to produce industry ready graduates.Proceedings - Frontiers in Education Conference, FIE, , 1513-1515 More Information

Navangul G.;Paul R.;Anand S. (06-01-2013. ) Error minimization in layered manufacturing parts by stereolithography file modification using a ver.Journal of Manufacturing Science and Engineering, Transactions of the ASME, , 135 (3 ) , More Information

Panhalkar N.;Paul R.;Anand S. (01-01-2013. ) A novel additive manufacturing file format for printed electronics.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 2 A , More Information

Paul R.;Anand S. (11-28-2012. ) Process energy analysis and optimization in selective laser sintering .Transactions of the North American Manufacturing Research Institution of SME, , 40 ,728-737

Paul R.;Anand S. (10-01-2012. ) Process energy analysis and optimization in selective laser sintering.Journal of Manufacturing Systems, , 31 (4 ) ,429-437 More Information

Anand S.; Kumar K.; Sydulu M. (01-01-2012. ) Comparison of multi agent based PSO approach for optimal power flows with security constraints.Applied Mechanics and Materials, , 110-116 ,5206-5210 More Information

Navangul G.;Paul R.;Anand S. (12-05-2011. ) A Vertex Translation Algorithm for adaptive modification of STL file in Layered Manufacturing.ASME 2011 International Manufacturing Science and Engineering Conference, MSEC 2011, , 1 ,435-441 More Information

Anand S.; Kumar R.; Sydulu M. (11-16-2011. ) A new multi agent based PSO approaches for optimal power flows with security constraints using diffe.IAMA 2011 - 2011 2nd International Conference on Intelligent Agent and Multi-Agent Systems, , 67-72 More Information

Paul R.;Anand S. (11-09-2011. ) Optimal part orientation in rapid manufacturing process for achieving geometric tolerances .Transactions of the North American Manufacturing Research Institution of SME, , 39 ,135-144

Paul R.;Anand S. (10-01-2011. ) Optimal part orientation in Rapid Manufacturing process for achieving geometric tolerances.Journal of Manufacturing Systems, , 30 (4 ) ,214-222 More Information

Ramaswami H.;Turek S.;Rajmohan S.;Anand S. (09-01-2011. ) A comprehensive methodology for runout tolerance evaluation using discrete data.International Journal of Advanced Manufacturing Technology, , 56 (5-8 ) ,663-676 More Information

Ramaswami H.;Shaw R.;Anand S. (04-01-2011. ) Selection of optimal set of cutting tools for machining of polygonal pockets with islands.International Journal of Advanced Manufacturing Technology, , 53 (9-12 ) ,963-977 More Information

Turek S.;Anand S. (02-21-2011. ) A hull normal based approach for cylindrical size assessment.Journal of Manufacturing Science and Engineering, Transactions of the ASME, , 133 (1 ) , More Information

Paul R.;Anand S. (12-01-2010. ) A translator for converting cad models to second life.Proceedings of the ASME Design Engineering Technical Conference, , 3 (PARTS A AND B ) ,1317-1325 More Information

Ramaswami H.;Anand S. (08-01-2010. ) Accurate size evaluation of cylindrical components.International Journal of Advanced Manufacturing Technology, , 49 (9-12 ) ,1079-1092 More Information

Soman K.;Ramaswami H.;Anand S. (12-01-2009. ) Selective zone search method for evaluation of minimum zone sphericity.Proceedings of the ASME International Manufacturing Science and Engineering Conference 2009, MSEC2009, , 2 ,517-524 More Information

Turek S.;Anand S. (11-23-2009. ) A comparison of virtual condition cylinder evaluation methods in coordinate metrology .2008 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC 2008, , 1 (PART B ) ,701-710

Ramaswami H.;Kanagaraj S.;Anand S. (01-01-2009. ) An inspection advisor for form error in cylindrical features.International Journal of Advanced Manufacturing Technology, , 40 (1-2 ) ,128-143 More Information

Turek S.;Anand S. (12-01-2008. ) A comparison of virtual condition cylinder evaluation methods in coordinate metrology.Proceedings of the ASME Design Engineering Technical Conference, , 1 (PARTS A AND B ) ,701-710 More Information

Turek S.;Ramaswami H.;Rajmohan S.;Anand S. (09-29-2008. ) Runout evaluation of cylindrical features using discrete surface profile data .Transactions of the North American Manufacturing Research Institution of SME, , 36 ,129-136

Kovvur Y.;Ramaswami H.;Anand R.B.;Anand S. (01-01-2008. ) Minimum-zone form tolerance evaluation using particle swarm optimisation.International Journal of Intelligent Systems Technologies and Applications, , 4 (1-2 ) ,79-96 More Information

Turek S.;Anand S. (12-28-2007. ) A hull normal approach for determining the size of cylindrical features.Proceedings of the ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007, , 615-622 More Information

Kumaravel P.;Anand S.;Ullas U.;Mohanram P.V. (10-01-2007. ) Cost optimization of process tolerance allocation-a tree based approach.International Journal of Advanced Manufacturing Technology, , 34 (7-8 ) ,703-713 More Information

Ramaswami H.;Modi A.;Anand S. (01-01-2007. ) A design advisor for the optimal inspection of circularity tolerance.International Journal of Advanced Manufacturing Technology, , 31 (9-10 ) ,857-870 More Information

Ramaswami H.;Acharya S.;Kovvur Y.;Anand S. (12-01-2006. ) A multivariate statistical analysis of sampling uncertainties in geometric and dimensional errors fo.Journal of Manufacturing Systems, , 25 (2 ) ,77-94 More Information

Ramaswami H.;Kovvur Y.;Anand S. (09-21-2006. ) Accurate size evaluation of cylindrical components using particle swarm optimization .Transactions of the North American Manufacturing Research Institute of SME, , 34 ,229-236

Ramaswami H.;Kovvur Y.;Anand S. (12-01-2005. ) Minimum-zone circularity evaluation using particle swarm optimization.American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, , 16-1 ,417-424 More Information

Kovvur Y.;Ramaswami H.;Anand S. (12-01-2005. ) Predictive surface generation and characterization for cylindrical turning processes.American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, , 16-2 ,933-942 More Information

Kovvur Y.;Ramaswami H.;Anand S. (12-01-2005. ) Analysis of sampling effects on form, position and size errors for cylindrical features using multiv .Transactions of the North American Manufacturing Research Institute of SME, , 33 ,509-516

Srinivasan S.;Acharya S.;Anand S. (12-17-2004. ) A factor analysis approach for robust inspection of circular features with lobing errors .Transactions of the North American Manufacturing Research Institute of SME, , 32 ,135-142

Kovvur Y.;Anand S.;McCord C. (12-17-2004. ) Design centering under conventional and sequential tolerance controls .Transactions of the North American Manufacturing Research Institute of SME, , 32 ,613-620

Ramaswami H.;Anand S. (12-01-2004. ) Multiple parting surfaces for sand casting.American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, , 15 ,329-337 More Information

Srinivasan S.;Kovvur Y.;Anand S. (12-01-2004. ) Probe radius compensation for On-Machine Measurement of sculptured surfaces.American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, , 15 ,913-920 More Information

Anand S.;Maheshwari N.;McCord C. (12-01-2003. ) On the selection of cmm based inspection methodology for circularity tolerance .Transactions of the North American Manufacturing Research Institution of SME, , 31 ,265-272

Sun A.;Anand S.;Tang J. (01-01-2002. ) Comprehensive design of experiments-based framework for optimal CMM inspection and uncertainty analy.International Journal of Production Research, , 40 (9 ) ,2097-2123 More Information

Anand S.;Pallapati R.;Uttam S.;McCord C. (01-01-2002. ) An integrated approach to tolerance allocation, process planning and scheduling .Technical Paper - Society of Manufacturing Engineers. MS, , (MS02-177 ) ,1-8

Sharma R.;Rajagopal K.;Anand S. (01-01-2000. ) A genetic algorithm based approach for robust evaluation of form tolerances .Journal of Manufacturing Systems, , 19 (1 ) ,46-57

Damodarasamy S.;Anand S. (01-01-1999. ) Evaluation of minimum zone for flatness by normal plane method and simplex search.IIE Transactions (Institute of Industrial Engineers), , 31 (7 ) ,617-626 More Information

Rajagopal K.;Anand S. (01-01-1999. ) Assessment of circularity error using a selective data partition approach.International Journal of Production Research, , 37 (17 ) ,3959-3979 More Information

Damodarasamy S.;Anand S. (01-01-1999. ) Evaluation of minimum zone for flatness by normal plane method and simplex search.IIE Transactions (Institute of Industrial Engineers), , 31 (7 ) ,617-626 More Information

Parasnis S.;Velidandla S.;Hall E.;Anand S. (12-01-1998. ) Comparison of optical modeling and neural networks for robot guidance .Proceedings of SPIE - The International Society for Optical Engineering, , 3522 ,74-82

Damodarasamy S.;Anand S. (12-01-1997. ) Accurate assessment of flatness tolerance using direct search optimization .American Society of Mechanical Engineers, Manufacturing Engineering Division, MED, , 6 ,217-224

Anand S.;Rajagopal K. (12-01-1997. ) Accurate evaluation of circularity using selective data partition .Industrial Engineering Research - Conference Proceedings, , 251-256

Mital A.;Kulkarni M.;Huston R.;Anand S. (01-01-1997. ) Robot cleaning of underground liquid storage tanks: Feasibility and design considerations.Robotics and Autonomous Systems, , 20 (1 ) ,49-60 More Information

Gasparraj E.;Anand S. (12-01-1996. ) New three dimensional convex hull algorithm and it's applications in flatness evaluation .Industrial Engineering Research - Conference Proceedings, , 239-244

Damodaran P.;Fernando S.;Anand S. (12-01-1996. ) Comparative evaluation of algorithms used for the determination of roundness tolerance .Industrial Engineering Research - Conference Proceedings, , 339-344

Srinivasa L.;Hall E.;Anand S. (12-01-1996. ) A neural network based classification of Bongard patterns .Intelligent Engineering Systems Through Artificial Neural Networks, , 6 ,473-477

Subbaraman M.;Paramaguru R.;Anand S.;Quo P. (12-01-1996. ) CAD directed on line cost estimation using activity based costing .Industrial Engineering Research - Conference Proceedings, , 781-786

Alladat V.;Anand S. (01-01-1996. ) Machine understanding of manufacturing features.International Journal of Production Research, , 34 (7 ) ,1791-1819 More Information

Allada V.;Anand S. (01-01-1996. ) Efficient vertex detection algorithms using the hough transform.International Journal of Advanced Manufacturing Technology, , 11 (6 ) ,394-405 More Information

Allada V.;Anand S. (12-01-1995. ) Interacting features recognition for prismatic parts .Industrial Engineering Research - Conference Proceedings, , 174-182

Allada V.;Anand S. (12-01-1995. ) Multi-attribute decision model using analytic hierarchy process for vendor selection .Industrial Engineering Research - Conference Proceedings, , 64-73

Anand S.;Guha B. (12-01-1995. ) Tool path generation for Bezier-based sculptured surfaces .Industrial Engineering Research - Conference Proceedings, , 251-259

Damodarasamy S.;Anand S. (12-01-1995. ) Evaluation of minimum zone for straightness using region elimination method .Industrial Engineering Research - Conference Proceedings, , 367-372

Kopardekar P.;Anand S. (07-01-1995. ) Tolerance allocation using neural networks.The International Journal of Advanced Manufacturing Technology, , 10 (4 ) ,269-276 More Information

Anand S.;Sabri M. (12-01-1994. ) Optimal robotic assembly planning using Dijkstra's algorithm .American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, , 73 ,117-124

Allada V.;Anand S.;Chu Y. (12-01-1994. ) Intelligent CNC cutting of sheet metal parts using machine vision .International Journal of Industrial Engineering : Theory Applications and Practice, , 1 (4 ) ,305-314

Anand S.;Egbelu P. (03-01-1994. ) On-line robotic spray painting using machine vision .International Journal of Industrial Engineering : Theory Applications and Practice, , 1 (1 ) ,87-95

Anand S.;Huffer N. (12-01-1993. ) Transformation algorithms for objects represented by quadtrees .Proceedings of the Industrial Engineering Research Conference, , 684-688

Kopardekar P.;Anand S.;Mital A. (12-01-1993. ) Neural networks approach for tolerance allocation problem .Intelligent Engineering Systems Through Artificial Neural Networks, , 3 ,701-706

Allada V.;Huffer N.;Anand S. (12-01-1993. ) Quad and octree structures for tolerance representation in solid models .Proceedings of the Industrial Engineering Research Conference, , 461-465

Kopardekar P.;Mital A.;Allada V.;Anand S. (12-01-1993. ) Human strategies in cutting stock problem .Proceedings of the Industrial Engineering Research Conference, , 183-186

Mital A.;Anand S.;Nalgirkar M. (01-01-1993. ) Point representation versus solid representation of limb mass and its effect on the moment at a join.International Journal of Industrial Ergonomics, , 11 (1 ) ,67-71 More Information

Kopardekar P.;Mital A.;Anand S. (01-01-1993. ) Manual, Hybrid and Automated Inspection Literature and Current Research.Integrated Manufacturing Systems, , 4 (1 ) ,18-29 More Information

Allada V.;Kopardekar P.;Anand S.;Mital A. (12-01-1992. ) Implications of ergonomic and user considerations on manufacturing consumer products .American Society of Mechanical Engineers, Design Engineering Division (Publication) DE, , 48 ,25-33

Allada V.;Anand S. (01-01-1992. ) Manufacturing applications of octrees.Computers and Industrial Engineering, , 23 (1-4 ) ,37-40 More Information

Mital A.;Anand S.;Parsael H. (12-01-1991. ) Assignment of functions to machines and humans in an FMS environment .American Society of Mechanical Engineers (Paper), , 1-7

Anand S.;Knott K. (01-01-1991. ) An algorithm for converting the boundary representation of a CAD model to its octree representation.Computers and Industrial Engineering, , 21 (1-4 ) ,343-347 More Information

Anand S.;Raman S.;Wysk R. (01-01-1988. ) Vision assisted NC milling path generation.Journal of Manufacturing Systems, , 7 (3 ) ,233-240 More Information

Anand S.;Raman S.;Wysk R. (01-01-1988. ) An algorithm for vertex detection.Computers and Industrial Engineering, , 14 (2 ) ,77-83 More Information

Anand S.;Knott K. (01-01-1986. ) Computer assisted models used in the solution of warehouse location-allocation problems.Computers and Industrial Engineering, , 11 (1-4 ) ,100-104 More Information

Student Advising

Vinay Jakkali (Doctoral ) Status:In Progress

Lun Li (Doctoral ) Status:In Progress

Srijana Shah (Doctoral ) Status:In Progress

Kunal Mhapsekar (Master ) Status:In Progress

Botao Zhang (Master ) Status:In Progress

Ranjan Melpal (Master ) Status:In Progress

Anay Joshi (Master ) Status:In Progress

Matthew McConaha (Master ) Status:In Progress

Archak Goel (Master ) Status:In Progress

Omkar Ghalsasi (Master ) Status:In Progress

Rebecca Creed (Master ) Status:In Progress

Anil Kumar Telikicherla (Master ) Status:In Progress

Shriyanka Joshi (Master ) Status:In Progress

Yonas Y Haile (Master )

Srikanth Reddy Pydala (Master ) Status:In Progress

Jaya Kashyap Ketharaju (Master ) Status:In Progress

Vysakh Venugopal (Master ) Status:In Progress

Courses Taught

CAD For Manufacturing

Precision Engineering and Computational Metrology

Manufacturing Processes