Jude Iroh

Jude Iroh

Professor

Research Support

Grant: #TCS41622 Investigators:Iroh, Jude 06-27-2003 -03-31-2004 General Motors Corporation Coatings on Carbon Fiber Papers and Stainless Steel Substrates Role:PI $28,025.00 Closed Level:Industry

Grant: #CCRP 2001 Investigators:Iroh, Jude 02-15-2002 -08-15-2003 Ohio Aerospace Institute Nanotechnology for Advanced Coatings Role:PI $67,928.00 Closed Level:Private Non-Profit

Grant: #DMR-9816355-NCE Investigators:Iroh, Jude 12-01-1998 -02-28-2003 National Science Foundation Processing and Characterization of Passive Films and Coatings Formed on Steel by Aqueous Electrochemical Process Role:PI $308,001.00 Closed Level:Federal

Grant: #CMMI-0758656 Investigators:Iroh, Jude 07-01-2008 -06-30-2013 National Science Foundation Development of Chromate-Free Hybrid Nanocomposite Coatings for the Protection of Metals Against Corrosion Role:PI $471,038.00 Active Level:Federal

Grant: #N00014-09-1-0980 Investigators:Iroh, Jude 07-01-2009 -06-30-2012 Office of Naval Research Hybrid Nanocomposite Coatings for Improved Impact Resistance and Bond Durability Role:PI $217,333.00 Active Level:Federal

Grant: #SRS 007396 Investigators:Iroh, Jude 01-10-2011 -01-09-2012 Ivanhoe Foundation Implication of Nano Particles on the Absorption of CU(II) on Granular Activated Carbon from Drinking Water Role:PI $.00 Closed Level:Private Non-Profit

Grant: #OSU 60059751-C11 sub ODHE I-Corps Investigators:Iroh, Jude 04-22-2017 -03-16-2018 Ohio Department of Higher Education Corrosion Resistant Hybrid Silanized Epoxy Ester Resins, Coatings and Surface Pre-treatment Formulations Role:PI $15,000.00 Active Level:State of Ohio

Publications

Peer Reviewed Publications

Akinyi C.; Iroh J. (01-01-2019. )Effect of graphene on the flammability behavior of polyimide-graphene composites .International SAMPE Technical Conference, ,2019-May ,

Feng L.; Iroh J. (03-05-2018. )Polyimide–polyurea copolymer coating with outstanding corrosion inhibition properties.Journal of Applied Polymer Science, ,135 (9 ),

Iroh J.; Marashdeh W. (11-05-2017. )Electrical properties of flexible graphene reinforced polyimide composites.Journal of Applied Polymer Science, ,134 (41 ),

Iroh J.; Marashdeh W. (10-01-2017. )Viscoelastic behavior and construction of master curve for graphene/polyimide nanocomposites.High Performance Polymers, ,29 (8 ),943-950

Iroh J.; Marashdeh W. (01-01-2017. )Dynamic mechanical behavior of polyimide/graphene nanocomposite for structural and electronic applic .International SAMPE Technical Conference, ,1234-1245

Balasubramani P.; Iroh J. (01-01-2017. )Mechanism and kinetics of curing of diglycidyl ether of bisphenol a (DGEBA) resin by Chitosan.Polymer Engineering and Science, ,57 (8 ),865-874

Iroh J.; Longun J.; Marashdeh W. (07-20-2016. )Relaxation behavior and activation energy of relaxation for polyimide and polyimide-graphene nanocom.Journal of Applied Polymer Science, ,133 (28 ),

Iroh J.; Vyas A. (07-01-2016. )Clay induced thermoplastic crystals in thermoset matrix: Thermal, Dynamic mechanical, and morphologi.Polymer Composites, ,37 (7 ),2206-2217

Iroh J.; Peng S. (05-05-2016. )Synthesis and characterization of crosslinked polyurethane/clay nanocomposites.Journal of Applied Polymer Science, ,133 (17 ),

Iroh J.; Okafor P. (07-16-2015. )Fabrication of porous graphene/polyimide composites using leachable poly-acrylic resin for enhanced .Journal of Materials Chemistry A, ,3 (33 ),17230-17240

Iroh J.; Peng S. (01-01-2015. )Properties of crosslinked polyurethane-clay nanocomposites .Annual Technical Conference - ANTEC, Conference Proceedings, ,635-638

Balasubramani P.; Iroh J. (01-01-2015. )Analysis of Chitosan cured epoxy resin using Avrami theory of phase change .Annual Technical Conference - ANTEC, Conference Proceedings, ,

Iroh J.; Okafor P. (01-01-2015. )Novel porous nano-graphene/polyimide composite as electrode material .Annual Technical Conference - ANTEC, Conference Proceedings, ,604-608

Iroh J.; Zhang Y. (01-01-2015. )Corrosion resistance of clay/hybrid silanized epoxy ester composites prepared by in-situ solution po .Annual Technical Conference - ANTEC, Conference Proceedings, ,

Iroh J.; Okafor P. (01-01-2015. )Porous graphene-polyimide nanocomposites for energy storage .International SAMPE Technical Conference, ,2015-January ,

Iroh J.; Zhang Y. (01-01-2015. )Corrosion resistanceof clay/hybrid silanized epoxy ester composites prepared by in-situ solution pol .International SAMPE Technical Conference, ,2015-January ,

Balasubramani P.; Iroh J. (01-01-2015. )Properties and curing kinetics of epoxy resin cured by chitosan asan environmentally friendly curing .International SAMPE Technical Conference, ,2015-January ,

Iroh J.; Okafor P.; Singh-Beemat J. (01-01-2015. )Thermomechanical and corrosion inhibition properties of graphene/epoxy ester-siloxane-urea hybrid po.Progress in Organic Coatings, ,88 ,237-244

Huxel B.; Iroh J.; Okafor P. (01-01-2015. )Electrochemical behavior of multifunctional graphene-polyimide nanocomposite film in two different e.Journal of Applied Polymer Science, ,132 (42 ),

Iroh J.; Vyas A. (04-01-2014. )Morphology and structure of nylon-6 crystallized in epoxy resin matrix.Polymer Engineering and Science, ,54 (4 ),858-866

Feng L.; Iroh J. (03-01-2014. )Corrosion resistance and lifetime of polyimide-b-polyurea novel copolymer coatings.Progress in Organic Coatings, ,77 (3 ),590-599

Iroh J.; Vyas A. (01-01-2014. )Thermo-mechanical and morphological properties of clay/nylon-6-epoxy nanocomposites .Annual Technical Conference - ANTEC, Conference Proceedings, ,2 (January ),978-984

Iroh J.; Vyas A. (01-01-2014. )Thermal behavior and structure of clay/nylon-6 nanocomposite synthesized by in situ solution polymer.Journal of Thermal Analysis and Calorimetry, ,117 (1 ),39-52

Iroh J.; Okafor P.; Singh-Beemat J. (01-01-2014. )Thermomechanical and corrosion inhibition properties of graphene/epoxy ester-siloxane-urea hybrid po .International SAMPE Technical Conference, ,

Hall S.; Iroh J.; Wang J. (01-01-2014. )Effect of polyaniline-modified clay on the processing and properties of clay polyimide nanocomposite.Applied Clay Science, ,99 ,215-219

Iroh J.; Vyas A. (12-05-2013. )In situ growth of multilayered crystals in amorphous matrix: Thermal, dynamic mechanical, and morpho.Journal of Applied Polymer Science, ,130 (5 ),3319-3327

Feng L.; Iroh J.; Singh-Beemat J. (11-01-2013. )Mechanism of corrosion protection of aluminum alloy substrate by hybrid polymer nanocomposite coatin.Progress in Organic Coatings, ,76 (11 ),1576-1580

Iroh J.; Longun J.; Walker G. (11-01-2013. )Surface and mechanical properties of graphene-clay/polyimide composites and thin films.Carbon, ,63 ,9-22

Feng L.; Iroh J. (07-01-2013. )Novel polyimide-b-polyurea supramacromolecule with remarkable thermomechanical and dielectric proper.European Polymer Journal, ,49 (7 ),1811-1822

Feng L.; Iroh J. (01-01-2013. )Polyurea-b-polyimide block copolymer coatings: Electrochemical impedance and dynamic mechanical stud .Annual Technical Conference - ANTEC, Conference Proceedings, ,1 ,760-764

Feng L.; Iroh J. (01-01-2013. )Effect of ladder-like polysilsesquioxane on the surface and thermomechanical properties of polyimide .Annual Technical Conference - ANTEC, Conference Proceedings, ,3 ,2062-2067

Feng L.; Iroh J. (01-01-2013. )Synthesis and corrosion inhibition of polyurea-b-polyimide copolymer coatings .Annual Technical Conference - ANTEC, Conference Proceedings, ,1 ,177-183

Iroh J.; Vyas A. (01-01-2013. )Morphology and properties of nylon-6/epoxy composites .Annual Technical Conference - ANTEC, Conference Proceedings, ,1 ,72-76

Iroh J.; Vyas A. (01-01-2013. )Morphology and thermal behavior of nylon-6/clay nanocomposites synthesized by in-situ soluiton polym .Annual Technical Conference - ANTEC, Conference Proceedings, ,1 ,503-507

Feng L.; Iroh J. (01-01-2013. )Polyimide-b-polysiloxane Copolymers: Synthesis and Properties.Journal of Inorganic and Organometallic Polymers and Materials, ,23 (3 ),477-488

Iroh J.; Longun J. (01-01-2013. )Polyimide/substituted polyaniline-copolymer-nanoclay composite thin films with high damping abilitie.Journal of Applied Polymer Science, ,128 (3 ),1425-1435

Iroh J.; Singh-Beemat J. (01-01-2013. )The effect of morphology on the corrosion inhibition and mechanical properties of hybrid polymer coa.Journal of Applied Polymer Science, ,128 (3 ),1616-1624

Iroh J.; Singh-Beemat J. (12-01-2012. )Effect of clay on the corrosion inhibition and dynamic mechanical properties of epoxy ester-polyurea.Polymer Engineering and Science, ,52 (12 ),2611-2619

Iroh J.; Long A.; Wang J. (07-25-2012. )Controlling the structure and rheology of polyimide/nanoclay composites by condensation polymerizati.Journal of Applied Polymer Science, ,125 (SUPPL. 1 ),

Iroh J.; Rajamani D. (05-01-2012. )Synthesis and Structure of Environmentally Friendly Hybrid Clay/Organosilane Nanocomposite Coatings.Journal of Inorganic and Organometallic Polymers and Materials, ,22 (3 ),595-603

Iroh J.; Longun J. (05-01-2012. )Viscoelastic Properties of Montmorillonite Clay/Polyimide Composite Membranes and Thin Films.Journal of Inorganic and Organometallic Polymers and Materials, ,22 (3 ),653-661

Iroh J.; Singh-Beemat J. (05-01-2012. )Characterization of corrosion resistant clay/epoxy ester composite coatings and thin films.Progress in Organic Coatings, ,74 (1 ),173-180

Iroh J.; Longun J. (04-01-2012. )Nano-graphene/polyimide composites with extremely high rubbery plateau modulus.Carbon, ,50 (5 ),1823-1832

Iroh J.; Singh J. (12-01-2011. )Study of corrosion inhibitors on aluminum alloy Al 2024-T3 .Materials Science and Technology Conference and Exhibition 2011, MS and T'11, ,2 ,1183-1193

Iroh J.; Longun J. (12-01-2011. )Processing and evaluation of durable corrosion inhibiting polyimide-silicone coatings for the protec .Materials Science and Technology Conference and Exhibition 2011, MS and T'11, ,1 ,1-11

Iroh J.; Singh J. (08-23-2011. )Synthesis and properties of multifunctional epoxy resin based coatings .Annual Technical Conference - ANTEC, Conference Proceedings, ,3 ,2405-2407

Iroh J.; Longun J. (08-22-2011. )Dynamic mechanical properties of novel polyimide/subtituted polyaniline-copolymer-clay nanocomposite .Annual Technical Conference - ANTEC, Conference Proceedings, ,1 ,519-524

Buschle B.; Iroh J.; Lo M.; Longun J.; Nguyen N. (12-15-2010. )Comparison of poly(o-anisidine) and poly(o-anisidine-co-aniline) copolymer synthesized by chemical o.Journal of Applied Polymer Science, ,118 (6 ),3123-3130

Garcia E.; Iroh J. (12-01-2008. )Effect of surface modification on the rheology of montmorillonite clay/polyimide nanocomposites .International SAMPE Technical Conference, ,

Anim-Mensah A.; Iroh J.; Lee J.; Zhang W. (12-01-2008. )Polyimide nanocomposite memebranes for separation of water and ethanol .International SAMPE Technical Conference, ,

Iroh J.; Nelson T. (12-01-2007. )UV and rheopectic behavior of polysiloxane-clay hybrid nanocomposites for uses in sunscreen products .International SAMPE Technical Conference, ,

Iroh J.; Tan L.; Wang H. (12-01-2007. )Electrochemical properties of multi-functional carbon nanofiber/polyimide nanocomposite coatings .International SAMPE Technical Conference, ,

Hourz M.; Iroh J.; Price G.; Tan L.; Wang H. (12-01-2007. )Characterization of vapor grown carbon nanofiber/polyimide nanocomposite films .International SAMPE Technical Conference, ,

Abot J.; Boddu H.; Hourz M.; Iroh J.; Price G.; Tan L.; Wang H. (12-01-2007. )Dynamic mechanical properties of carbon nanofiber/polyimide and carbon nanotube/polyimide nanocompos .International SAMPE Technical Conference, ,

Iroh J.; Rajamani D. (12-01-2006. )Processing and properties of environmentally friendly corrosion resistant hybrid nanocomposite coati .International SAMPE Technical Conference, ,

Iroh J.; Rajamani D. (12-01-2006. )Chemical structure and cure kinetics of environmentally friendly corrosion resistant hybrid nanocomp .International SAMPE Symposium and Exhibition (Proceedings), ,51 ,

Iroh J.; Rajamani D. (12-01-2006. )Corrosion performance of environmentally friendly corrosion resistant hybrid nanocomposite coatings .International SAMPE Symposium and Exhibition (Proceedings), ,51 ,

Iroh J.; Kottarath S.; Rajamani D.; Shah K. (12-01-2005. )Durable hybrid nanocomposite coatings for the protection of aluminum alloy 2024-T3 .International SAMPE Symposium and Exhibition (Proceedings), ,50 ,2227-2238

Cain R.; Gajela P.; Hall S.; Iroh J.; Nelson T. (12-01-2005. )Conducting polymer coatings with controlled surface roughness for improved adhesion and corrosion pe .International SAMPE Symposium and Exhibition (Proceedings), ,50 ,2175-2188

Iroh J.; Shah K. (12-01-2004. )Poly(O-anisidine) coatings electrodeposited onto AL-2024: Synthesis, characterization, and corrosion.Advances in Polymer Technology, ,23 (4 ),291-297

Iroh J.; Kosel P.; Levine K. (05-31-2004. )Synthesis and properties of the nanocomposite of zink oxide and poly(amic acid).Applied Surface Science, ,230 (1-4 ),24-33

Iroh J.; Levine K. (03-01-2004. )Resistance of the polypyrrole/polyimide composite by electrochemical impedance spectroscopy.Journal of Porous Materials, ,11 (2 ),87-95

Iroh J.; Shah K. (01-01-2004. )Adhesion of electrochemically formed conducting polymer coatings on Al-2024.Surface Engineering, ,20 (1 ),53-58

Balbyshev V.; Donley M.; Iroh J.; Johnson J.; Khramov A.; Levine K.; Mantz R.; Shah K.; Voevodin N.; Zhu Y. (01-01-2004. )Electrochemical behaviour of conducting polymer/polyimide composite.Surface Engineering, ,20 (2 ),93-98

Iroh J.; Levine K. (10-01-2003. )Electrochemical behavior of the polypyrrole/polyimide composite by potential step amperometry.Journal of Power Sources, ,124 (1 ),355-359

Iroh J.; Rajagopalan R. (09-30-2003. )Characterization of polyaniline-polypyrrole composite coatings on low carbon steel: A XPS and infrar.Applied Surface Science, ,218 (1-4 ),58-69

Iroh J.; Levine K. (05-15-2003. )Capacitance of the polypyrrole/polyimide composite by electrochemical impedance spectroscopy.Journal of Power Sources, ,117 (1-2 ),267-272

Balbyshev V.; Donley M.; Iroh J.; Johnson J.; Khramov A.; Levine K.; Mantz R.; Rajagopalan R.; Shah K.; Uyar T.; Voevodin N.; Zhu Y. (01-01-2003. )Electrochemical synthesis: A novel technique for processing multi-functional coatings.Progress in Organic Coatings, ,47 (3-4 ),365-375

Iroh J.; Shah K. (12-02-2002. )Electrochemical synthesis and corrosion behavior of poly(N-ethyl aniline) coatings on Al-2024 alloy.Synthetic Metals, ,132 (1 ),35-41

Aykanat A.; Iroh J. (12-01-2002. )Carbon fiber-polyaniline composites: Kinetics of electrodeposition of polyaniline onto carbon fibers.Journal of Adhesion, ,78 (7 ),629-643

Iroh J.; Zhu Y. (10-01-2002. )Electrochemical synthesis of polyaniline films in the presence of inorganic fillers and their effect .Journal of Advanced Materials, ,34 (4 ),16-21

Iroh J.; Su W. (09-23-2002. )Adhesion of electrochemically formed polypyrrole coatings to low carbon steel.Journal of Applied Polymer Science, ,85 (13 ),2757-2763

Akundy G.; Iroh J.; Shah K. (08-22-2002. )Polyaniline coated on aluminum (Al-2024-T3): Characterization and electrochemical studies.Journal of Applied Polymer Science, ,85 (8 ),1669-1675

Iroh J.; Levine K. (08-01-2002. )Electrochemical synthesis of polypyrrole/polyimide conducting composite using a polyamic acid precur.European Polymer Journal, ,38 (8 ),1547-1550

Iroh J.; Rajagopalan R. (05-07-2002. )A one-step electrochemical synthesis of polyaniline-polypyrrole composite coatings on carbon fibers.Electrochimica Acta, ,47 (12 ),1847-1855

Iroh J.; Rajagopalan R. (04-04-2002. )Electrochemical copolymerization and characterization of aniline and isoprene in aqueous p-toluene s.Journal of Applied Polymer Science, ,84 (1 ),184-192

Iroh J.; Jordan K. (04-01-2002. )Dynamic mechanical properties of carbon fiber/PMR-15 composites containing thermoplastic co-polyimid .Journal of Advanced Materials, ,34 (2 ),3-14

Akundy G.; Iroh J.; Rajagopalan R. (02-28-2002. )Electrochemical deposition of polyaniline-polypyrrole composite coatings on aluminum.Journal of Applied Polymer Science, ,83 (9 ),1970-1977

Iroh J.; Rajagopalan R. (01-01-2002. )Electrodeposition of adherent polyaniline-polypyrrole composite coatings on low carbon steel.Journal of Adhesion, ,78 (10 ),835-860

Iroh J.; Rajagopalan R. (01-01-2002. )Corrosion performance of polyaniline-polypyrrole composite coatings applied to low carbon steel.Surface Engineering, ,18 (1 ),59-63

Iroh J.; Rajagopalan R. (01-01-2002. )Pretreatment and coating of low carbon steel using constant potential electrochemical process.Surface Engineering, ,18 (1 ),53-58

Aykanat A.; Iroh J. (01-01-2002. )Characterization of electrochemically deposited polyaniline-polypyrrole blend coatings on carbon fib.Composite Interfaces, ,9 (1 ),61-75

Iroh J.; Popoola O.; Shah K.; Zhu Y. (12-03-2001. )Corrosion protection properties of polyaniline-polypyrrole composite coatings on Al 2024.Surface Engineering, ,17 (5 ),405-412

Iroh J.; Levine K. (09-26-2001. )Electrochemical behavior of a composite of polyimide and polypyrrole.Journal of Materials Chemistry, ,11 (9 ),2248-2252

Iroh J.; Levine K. (09-11-2001. )Electrochemical behavior of a composite of polyimide and polypyrrole.Journal of Materials Chemistry, ,11 (9 ),2249-2253

Akundy G.; Iroh J. (08-28-2001. )Polypyrrole coatings on aluminum - Synthesis and characterization.Polymer, ,42 (24 ),9665-9669

Iroh J.; Rajagopalan R. (05-01-2001. )Development of polyaniline-polypyrrole composite coatings on steel by aqueous electrochemical proces.Electrochimica Acta, ,46 (16 ),2443-2455

Iroh J. (01-01-2001. )Conducting polymer coating: A viable alternative to chromate conversion coating .Surface Engineering, ,17 (4 ),265-267

Akundy G.; Iroh J.; Popoola O.; Shah K.; Zhu Y. (01-01-2001. )Corrosion and bonding behaviors of intrinsically conductive polymers on aluminum (Al 2024-T3) .Key Engineering Materials, ,197 ,111-119

Iroh J.; Rajagopalan R. (12-01-2000. )Electrochemical synthesis of polyaniline-polypyrrole composite coatings on carbon fibres in aqueous .Surface Engineering, ,16 (6 ),481-486

Iroh J.; Su W. (10-31-2000. )Corrosion performance of polypyrrole coating applied to low carbon steel by an electrochemical proce.Electrochimica Acta, ,46 (1 ),15-24

Iroh J.; Wencheng S. (10-31-2000. )Electrodeposition mechanism of polypyrrole coatings on steel substrates from aqueous oxalate solutio.Electrochimica Acta, ,46 (1 ),1-8

Iroh J.; Su W. (09-01-2000. )Electrodeposition mechanism, adhesion and corrosion performance of polypyrrole and poly(N-methylpyrr .Synthetic Metals, ,114 (3 ),225-234

Iroh J.; Su W. (01-01-2000. )Surface composition and topography of electrodeposited polypyrrole coatings on steel substrates.Journal of Adhesion, ,73 (2-3 ),215-231

Iroh J.; Rajagopalan R. (01-01-2000. )Electrochemical polymerization of aniline on carbon fibers in aqueous toluene sulfonate solution.Journal of Applied Polymer Science, ,76 (10 ),1503-1509

Iroh J.; Rajagopalan R. (01-01-2000. )Characterization of conducting composite coatings formed on steel by aqueous electrochemical process.Surface Engineering, ,16 (4 ),321-326

Iroh J.; Jordan K. (01-01-2000. )Mechanical properties of carbon fibre/PMR-15 composites containing thermoplastic polyimide interphas.Surface Engineering, ,16 (4 ),303-308

Iroh J.; Su W. (09-15-1999. )Morphology and structure of the passive interphase formed during aqueous electrodeposition of polypy.Electrochimica Acta, ,44 (26 ),4655-4665

Iroh J.; Su W. (05-15-1999. )IR and XPS studies on the interphase and poly(N-methylpyrrole) coatings electrodeposited on steel su.Electrochimica Acta, ,44 (19 ),3321-3332

Iroh J.; Su W. (03-21-1999. )Characterization of the Passive Inorganic Interphase and Polypyrrole Coatings Formed on Steel by the.Journal of Applied Polymer Science, ,71 (12 ),2075-2086

Iroh J.; Su W. (02-22-1999. )Electrodeposition of Poly(N-methylpyrrole) Coatings on Steel from Aqueous Medium .Journal of Applied Polymer Science, ,71 (8 ),1293-1302

Iroh J.; Su W. (02-15-1999. )Electropolymerization of pyrrole on steel substrate in the presence of oxalic acid and amines.Electrochimica Acta, ,44 (13 ),2173-2184

Iroh J.; Williams C. (01-29-1999. )Formation of thermally stable polypyrrole-naphthalene/benzene sulfonate-carbon fiber composites by a.Synthetic Metals, ,99 (1 ),1-8

Chen Y.; Iroh J. (01-01-1999. )Synthesis and characterization of polyimide/silica hybrid composites.Chemistry of Materials, ,11 (5 ),1218-1222

Iroh J.; Wood G. (01-01-1999. )Control of surface structure of graphite fibres for improved composite interfacial properties.Surface Engineering, ,15 (3 ),255-260

Chen Y.; Iroh J. (01-01-1999. )Electrochemical synthesis and characterization of polypyrrole-poly(styrene sulfonate) composite coat.Polymer Composites, ,20 (3 ),482-492

Iroh J.; Su W. (01-01-1999. )Modification of reactive metals by aqueous electrochemical process.Surface Engineering, ,15 (3 ),249-254

Chen Y.; Iroh J. (01-01-1999. )Electrodeposition of BTDA-ODA-PDA polyamic acid coatings on carbon fibers from nonaqueous emulsions.Polymer Engineering and Science, ,39 (4 ),699-707

Chen Y.; Iroh J. (01-01-1999. )Processing and characterization of YSZ-PSS-DBS composites.Journal of Applied Polymer Science, ,74 (3 ),502-509

Iroh J.; Su W. (08-30-1998. )One-step electrochemical process for the formation of poly(N-methylpyrrole) coatings on steel in dif .Synthetic Metals, ,97 (1 ),73-80

Iroh J.; Su W. (06-30-1998. )Effects of electrochemical process parameters on the synthesis and properties of polypyrrole coating .Synthetic Metals, ,95 (3 ),159-167

Iroh J.; Su W. (03-01-1998. )Investigation on the electrodeposition process of polypyrrole coatings on steel by infrared spectros .American Chemical Society, Polymer Preprints, Division of Polymer Chemistry, ,39 (1 ),159

Iroh J.; Wood G. (01-01-1998. )Control of carbon fiber-polypyrrole interphases by aqueous electrochemical process.Composites Part B: Engineering, ,29 (2 ),181-188

Iroh J.; Jordan K. (12-26-1997. )Rate of imidization of polymerizable reaction mixtures: PMR-15.Journal of Applied Polymer Science, ,66 (13 ),2529-2538

Iroh J.; Su W. (12-26-1997. )Effect of process parameters on the electropolymerization potential and rate of formation of polypyr .Journal of Applied Polymer Science, ,66 (13 ),2433-2440

Iroh J.; Su W. (07-18-1997. )Kinetics and efficiency of aqueous electropolymerization of pyrrole onto low-carbon steel .Journal of Applied Polymer Science, ,65 (3 ),617-624

Iroh J.; Su W. (07-18-1997. )Formation of polypyrrole coatings onto low carbon steel by electrochemical process.Journal of Applied Polymer Science, ,65 (3 ),417-424

Iroh J.; Jordan K. (01-01-1997. )Effect of isothermal aging on post-imidization and glass transition temperature of LaRC-IA polyimide.Polymer Composites, ,18 (3 ),397-404

Iroh J.; Su W. (01-01-1997. )Formation of polypyrrole coatings on stainless steel in aqueous benzene sulfonate solution.Electrochimica Acta, ,42 (17 ),2685-2694

Iroh J.; Jordan K. (01-01-1997. )Kinetic models for the imidization of PMR-15 .Annual Technical Conference - ANTEC, Conference Proceedings, ,2 ,1743-1747

Iroh J.; Wood G. (01-01-1997. )Effect of electrolytes on the kinetics and mechanism of the electropolymerization of pyrrole on to c.European Polymer Journal, ,33 (1 ),107-114

Iroh J.; Wood G. (12-05-1996. )Physical and chemical properties of polypyrrole-carbon fiber interphases formed by aqueous electrosy.Journal of Applied Polymer Science, ,62 (10 ),1761-1769

Berry J.; Iroh J. (12-01-1996. )Mechanical properties of nucleated polypropylene and short glass fiber-polypropylene composites.European Polymer Journal, ,32 (12 ),1425-1429

Iroh J.; Wood G. (07-18-1996. )Effect of electrolytes and process parameters on the electropolymerization of pyrrole onto carbon fi.Journal of Applied Polymer Science, ,61 (3 ),519-528

Iroh J.; Wood G. (06-15-1996. )Efficiency of electropolymerization of pyrrole onto carbon fibers.Synthetic Metals, ,80 (1 ),73-82

Iroh J.; Yuan W. (01-24-1996. )Formation of graphite fiber-polyimide prepregs by electrodeposition .Journal of Applied Polymer Science, ,59 (4 ),737-747

Iroh J.; Jordan K. (01-01-1996. )Effect of isothermal aging on the imidization of PMR-15.Polymer Engineering and Science, ,36 (20 ),2550-2555

Iroh J.; Wood G. (01-01-1996. )The effect of process parameters on the morphology of polypyrrole coatings formed on carbon fibers.Polymer Engineering and Science, ,36 (19 ),2389-2395

Iroh J.; Yuan W. (01-01-1996. )Surface properties of carbon fibres modified by electrodeposition of polyamic acid.Polymer, ,37 (18 ),4197-4203

Chifu A.; Iroh J. (01-01-1996. )Short term isothermal aging of epoxy resin and epoxy-carbon fiber composites.Polymer Composites, ,17 (3 ),408-413

Chifu A.; Iroh J. (01-01-1996. )Mechanical and physical properties of isothermally aged carbon fiber-epoxy composites.Polymer Composites, ,17 (3 ),532-536

Iroh J.; Wood G. (12-01-1995. )Influence of processing parameters on the morphology of polypyrrole coatings electrochemically polym .International SAMPE Technical Conference, ,27 ,1059-1073

Grunden B.; Iroh J. (01-01-1995. )Formation of graphite fibre-polypyrrole coatings by aqueous electrochemical polymerization.Polymer, ,36 (3 ),559-563

Iroh J.; Labes M.; Suhng Y. (01-01-1994. )Characterization of electropolymerized graphite fiber–polyacrylamide composites.Journal of Applied Polymer Science, ,52 (9 ),1203-1210

Bell J.; Iroh J.; Scola D.; Wesson J. (01-01-1994. )Electrochemical process for preparing continuous graphite fibre-thermoplastic composites.Polymer, ,35 (6 ),1306-1311

Berry J.; Iroh J. (01-01-1993. )Heterogeneous nucleation of short glass fibre-polypropylene composites.Polymer, ,34 (22 ),4747-4751

Berry J.; Iroh J. (01-01-1993. )Interfacial shear strength of nucleated short glass-fibre reinforced polypropylene.Polymer, ,34 (11 ),2302-2305

Iroh J.; Labes M.; Suhng Y. (01-01-1993. )Use of Polymer-Metal Ion Complexes To Improve Carbon Fiber-Metal Matrix Compatibility.Chemistry of Materials, ,5 (5 ),652-657

Bell J.; Iroh J.; Scola D. (01-01-1993. )Mechanical Properties of Electropolymerized Matrix Composites.Chemistry of Materials, ,5 (1 ),78-83

Bell J.; Iroh J.; Scola D. (01-01-1993. )Mechanism of the electrocopolymerization of styrene and N?(3?carboxyphenyl)maleimide onto graphite f.Journal of Applied Polymer Science, ,47 (1 ),93-104

Bell J.; Iroh J.; Scola D. (01-01-1993. )Rate of electropolymerization of N,N'dimethyl acrylamide in aqueous sulfuric acid solution.Journal of Applied Polymer Science, ,49 (4 ),583-592

Bell J.; Iroh J.; Liang J.; Mehta A. (01-01-1993. )Preparation and characterization of electropolymerized poly(N?substituted maleimide?co?styrene) coat.Journal of Applied Polymer Science, ,48 (3 ),465-476

Bell J.; Iroh J.; Scola D. (12-01-1992. )Mechanical properties of electropolymerized matrix composites .International SAMPE Electronics Conference, ,24 ,748-761

Iroh J.; Labes M. (09-01-1992. )Pulsed-Current Electropolymerization and Postelectropolymerization Of Acrylamide in Sulfuric Acid.Macromolecules, ,25 (20 ),5178-5180

Bell J.; Iroh J.; Scola D. (01-01-1991. )Aqueous electropolymerization of polyacrylamide onto AS?4 graphite fibers.Journal of Applied Polymer Science, ,43 (12 ),2237-2247

Bell J.; Iroh J.; Scola D. (01-01-1990. )Thermoplastic matrix composites by aqueous electrocopolymerization onto graphite fibers.Journal of Applied Polymer Science, ,41 (3-4 ),735-749

Bell J.; Iroh J.; Scola D. (12-01-1989. )Controllable thermoplastic coating for advanced polymeric composites .National SAMPE Technical Conference, ,21 ,767-781

Bell J.; Iroh J.; Kim W.; Scola D. (12-01-1989. )Electropolymerization of polymers onto graphite fibers .Annual Technical Conference - Society of Plastics Engineers, ,565-567