Milind A. Jog

Ph. D.: University of Pennsylvania Philadelphia, PA, 1993 (Mechanical Engineering & Applied Mechanics)

M. Tech.: Indian Institute of Technology Bombay, India, 1986 (Mechanical Engineering)

B. Tech.: Indian Institute of Technology Bombay, India, 1985 (Mechanical Engineering)

My group conducts fundamental and applied research in fluid mechanics, heat and mass transport at multiple scales and with multiple phases using both computational and experimental techniques. In particular, my research interests are:

• Liquid Atomization and Spray Systems
• Interfacial Phenomena and Phase Change Heat Transfer
• Computational Fluid Mechanics, Heat and Mass Transfer
• Plasma Heat Transfer
• Heat Transfer Enhancement

Grant: #NCE Investigators:Jog, Milind 09-01-2003 -05-31-2004 Environmental Protection Agency Simulation of Tracer Mixing in Water Tank using CFD Technique Role:PI $25,000.00 Closed Level:Federal

Grant: #NCE Investigators:Jog, Milind 10-08-2001 -07-31-2002 Parker Hannifin Corporation Development of Computational Fluid Dynamics Code-Simplex Nozzle Role:PI $54,600.00 Closed Level:Industry

Grant: #OSP01128 Investigators:Jog, Milind 12-01-1996 -06-30-2001 Parker Hannifin Corporation Computational Fluid Dynamics Code for Prediction of Flow in a Simplex Nozzle Role:PI $247,000.00 Closed Level:Industry

Grant: #CTS-9733369-NCE Investigators:Jog, Milind 07-01-1998 -06-30-2002 National Science Foundation Plasma Heat Transfer: Research and Education Role:PI $310,000.00 Closed Level:Federal

Grant: #NRC-08-07-503 Investigators:Jog, Milind; Manglik, Raj; Su, Bingjing 07-01-2007 -10-31-2008 Nuclear Regulatory Commission Development of a Novel Problem-Based Learning Curriculum on Thermal-Hydraulics for Reactor Safety Analysis Role:Collaborator $157,263.00 Closed Level:Federal

Grant: #U01 ES016123 Investigators:Jog, Milind; Lemasters, Grace; Lockey, James; Son, Sang Young 08-15-2007 -05-31-2012 National Institute of Environmental Health Sciences Development and Field Testing of a Wearable Sensor for the Detection of Airborne Nanosized Particles Role:Collaborator $2,229,419.00 Closed Level:Federal

Grant: #TTTP-0755720 Investigators:Jog, Milind; Manglik, Raj 03-01-2008 -02-28-2013 National Science Foundation Molecular-Scale Solutal Electrokinetics and Micro-Scale Control of Interfacial Phenomena in Ebullient Heat Transfer Role:Collaborator $300,000.00 Closed Level:Federal

Grant: #TECH-09-022 Investigators:Abdallah, Shaaban; Cohen, Kelly; Hamed, Awatef; Jeng, San-Mou; Jog, Milind; Khosla, Prem; Lee, Jay; Qian, Dong; Schulz, Mark; Shanov, Vesselin; Singh, Raj; Steckl, Andrew; Turner, Mark; Vasudevan, Vijay; Walker, Bruce 08-18-2008 -08-17-2013 Ohio Department of Development Intelligent Propulsion and Power Systems and Their Life Management Role:Collaborator $27,492,308.00 Active Level:State of Ohio

Grant: #NRC-38-09-904 Investigators:Jog, Milind; Manglik, Raj 07-15-2009 -07-14-2011 Nuclear Regulatory Commission Integrated Multi-Scale Design and Laboratory Curricula for Nuclear Thermal-Hydraulics Engineering Role:Collaborator $150,000.00 Closed Level:Federal

Grant: #OISE-0928110 Investigators:Jog, Milind 09-01-2009 -08-31-2010 National Science Foundation US-India Research Workshops and the 9th ASME-ISHMT Conference Role:PI $28,875.00 Closed Level:Federal

Grant: #S-932-19-MR003/ FA8650-11-C-2200 Investigators:Jog, Milind; Manglik, Raj 02-01-2012 -06-30-2012 Department of the Air Force Numerical Modeling of Multicomponent Multiphase Fluid Flow Role:PI $25,000.00 Closed Level:Federal

Grant: #PO200-1J-14Y16211 Investigators:Abdallah, Shaaban; Jog, Milind; Manglik, Raj 02-01-2012 -12-31-2012 General Electric Aviation Fan Compartment Cooling and Ventilation Role:Collaborator $60,000.00 Active Level:Industry

Grant: #PO# 200-1J-14Y16212 Investigators:Abdallah, Shaaban; Jog, Milind; Manglik, Raj 02-01-2012 -12-31-2012 General Electric Aviation Core Compartment Cooling and Ventilation Role:Collaborator $60,000.00 Active Level:Industry

Grant: #S-953-19-MR002 \ FA8650-12-D-2225, Task Order 0001 Investigators:Jog, Milind; Manglik, Raj 07-01-2012 -01-31-2014 Department of the Air Force Numerical Modeling of Multiicomponent Multiphase Fluid Flow Role:PI $95,000.00 Active Level:Federal

Grant: #PO 200-1J--1BH32382 (RFQ 535-BLANKET) Investigators:Jeng, San-Mou; Jog, Milind; Lee, Jongguen; Tambe, Samir; Turner, Mark 11-26-2013 -12-31-2016 General Electric - GE Transportation - Aircraft Division Blanket PO for FY2014, FY 2015, and FY2016 Role:Collaborator $900,000.00 Awarded Level:Industry

Grant: #DE-AR0000577 Investigators:Jog, Milind; Manglik, Raj 09-08-2015 -09-07-2018 Department of Energy ENHANCED AIR-COOLING SYSTEM WITH OPTIMIZED ASYNCHRONOUSLY-COOLED THERMAL ENERGY STORAGE Role:Collaborator $3,415,096.49 Awarded Level:Federal

Grant: #200-2015-M-62951 Investigators:Jog, Milind 07-15-2015 -07-14-2016 National Institute for Occupational Safety and Health Experimental and Computational Studies on Particle Charging and Sampling for Real-time Instrumentation Role:PI $23,282.32 Awarded Level:Federal

Grant: #URC Interdisciplinary Award AY2015-16 Investigators:Buchanan, Relva; Gutmark, Ephraim; Jog, Milind; Simonetti, Francesco 05-01-2016 -04-30-2017 UC's University Research Council MATERIAL SURVIVABILITY AND ABLATION INVESTIGATION USING THE COMBUSTION CHAMBER OF A ROTATING DETONATION ENGINE Role:Collaborator $25,000.00 Active Level:Internal UC

Grant: #211-2016-M-90517 Investigators:Jog, Milind 07-01-2016 -09-30-2017 National Institute for Occupational Safety and Health Experimental and Computational Studies on Particle Charging, Transport and Sampling for Real-time Instrumentation Role:PI $45,900.00 Active Level:Federal

Grant: #211-2017-M-94546 Investigators:Jog, Milind 08-01-2017 -08-31-2018 National Institute for Occupational Safety and Health Numerical Investigation of Powder Aerosolisation in a Rotating Drum Apparatus Role:PI $15,000.00 Active Level:Federal

Grant: #75D30118P01599 Investigators:Jog, Milind 09-01-2018 -08-31-2019 Centers for Disease Control and Prevention Numerical Investigation of Powder Aerosolization Role:PI $25,000.00 Active Level:Federal

Grant: #75D30119P06984 Investigators:Jog, Milind 09-26-2019 -03-31-2021 National Institute for Occupational Safety and Health Numerical Investigation of Powder Aerosolisation in a Falling Powder Apparatus Role:PI $24,950.00 Awarded Level:Federal

Grant: #75D30120P09405 Investigators:Jog, Milind 09-01-2020 -09-30-2021 Centers for Disease Control and Prevention Dust Generation from Falling Powder Role:PI $24,950.00 Awarded Level:Federal

Grant: #DE-FE0031979 Investigators:Jog, Milind; Manglik, Raj 02-01-2021 -01-31-2024 Department of Energy AOI [2B]: Advanced Dry-Cooling with Integrated Enhanced Air-Cooled Condenser and Daytime Load-Shifting Thermal Energy Storage for Improved Power-Plant Efficiency Role:Collaborator $486,846.00 Active Level:Federal

Grant: #75D30121P10945 07-01-2021 -06-30-2022 Centers for Disease Control and Prevention Numerical Modeling and Analysis of Dielectrophoretic Classifiers for Fiber Length Separation Role:PI 25000.00 Awarded Level:Federal

Grant: #75D30121P10945 07-01-2021 -06-30-2022 Centers for Disease Control and Prevention Numerical Modeling and Analysis of Dielectrophoretic Classifiers for Fiber Length Separation Role:PI 25000.00 Awarded Level:Federal

Grant: #75D30121P11498 07-01-2021 -09-30-2022 Centers for Disease Control and Prevention Numerical Investigation of Dispersability of Rock Dust Role:PI 22499.69 Awarded Level:Federal

Grant: #75D30121P11498 07-01-2021 -09-30-2022 Centers for Disease Control and Prevention Numerical Investigation of Dispersability of Rock Dust Role:PI 22499.69 Awarded Level:Federal

Grant: #75D30121P11497 Investigators:Jog, Milind 07-01-2021 -09-30-2022 Centers for Disease Control and Prevention Numerical Investigation of Dust Exposure from a Falling Powder Role:PI 24983.64 Awarded Level:Federal

Grant: #75D30122P14090 Investigators:Jog, Milind 06-05-2022 -09-30-2023 Centers for Disease Control and Prevention CFD Simulation of Powder Hill Disintegration within the VDT Injection Tube Role:PI 0.00 Hold Level:Federal

Grant: #22IPA2216243 Investigators:Jog, Milind 09-01-2022 -08-31-2023 Centers for Disease Control and Prevention 22IPA22Centers for Disease Control and Prevention (CDC) U.S. Department of Health and Human Services (HHS)IPA Role:PI 30000.00 Hold Level:Federal

Peer Reviewed Publications

Jog M.;Banerjee D. (05-01-2019. ) Frontiers, Fundamentals, and Future Directions of Transport: From Theory to Applications - A Special.Journal of Heat Transfer, , 141 (5 ) , More Information

Manoharan S.;Deodhar A.M.;Manglik R.M.;Jog M.A. (05-01-2019. ) Computational Modeling of Adiabatic Bubble Growth Dynamics from Submerged Capillary-Tube Orifices in.Journal of Heat Transfer, , 141 (5 ) , More Information

Volk A.;Ghia U.;Jog M. (12-01-2018. ) How Computational Grid Refinement in Three Dimensions Affects Computational Fluid Dynamics-Discrete .Journal of Fluids Engineering, Transactions of the ASME, , 140 (12 ) , More Information

Lin K.T.;Jog M.A.;Manglik R.M. (01-01-2018. ) Computational modeling of single-phase laminar flow heat transfer in complex plate-fin ducts .International Heat Transfer Conference, , 2018-August ,5381-5388

Shi D.;Jog M.A.;Manglik R.M. (01-01-2018. ) Computational modeling of low Reynolds number air flows in wavy-plate-fin channels: Contribution of .International Heat Transfer Conference, , 2018-August ,5123-5530

Gokhale O.;Jog M.;Manglik R. (01-01-2018. ) Experimental study of chamber volume effect on bubble formation from orifice plates submerged in wat.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 7 , More Information

Jog M. (01-01-2017. ) Applications: Heat transfer in plasma sprays.CRC Handbook of Thermal Engineering, Second Edition, , 1003-1016 More Information

Manoharan S.;Jog M.;Manglik R. (01-01-2017. ) Effects of liquid viscosity on bubble growth from submerged orifice plates.ASME 2017 Heat Transfer Summer Conference, HT 2017, , 2 , More Information

Bhave C.;Manglik R.;Jog M. (01-01-2017. ) Computational study of enhanced convection and effects of geometrical features in offset strip fin c.ASME 2017 Heat Transfer Summer Conference, HT 2017, , 2 , More Information

Rajendran S.;Jog M.;Manglik R. (01-01-2017. ) Experimental investigation of jet breakup at low Weber number.Atomization and Sprays, , 27 (9 ) ,821-834 More Information

Manglik R.;Jog M. (01-01-2016. ) Resolving the energy-water nexus in large thermoelectric power plants: A case for application of enh.Journal of Enhanced Heat Transfer, , 23 (4 ) ,263-282 More Information

Manoharan S.;Jog M.;Manglik R. (01-01-2016. ) Visual observations of chamber volume effect on ebullience from submerged orifice plates.American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, , 1B-2016 , More Information

Abdelaal M.;Huzayyin O.;Jog M. (01-01-2015. ) Heat/Mass transfer to a drop translating in a perpendicular electric field.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 7A-2015 , More Information

Rajendran S.;Jog M.;Manglik R. (01-01-2015. ) Numerical analysis of liquid breakup and drop generation in low velocity jets.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 3-2015 , More Information

Rojatkar P.;Jog M.A.;Jeng S.M. (01-01-2015. ) Numerical study of flow through 3x3 multiswirler arrays with CO and counter swirler arrangements.Proceedings of the ASME Turbo Expo, , 4B , More Information

Manoharan S.;Kalaikadal D.;Manglik R.;Jog M.;Iskrenova-Ekiert E.;Patnaik S. (01-01-2015. ) Visualization of multiscale processes - Bubble dynamics in surface active colloids.Journal of Heat Transfer, , 137 (8 ) , More Information

Bishara F.;Jog M.;Manglik R. (01-01-2014. ) Heat transfer enhancement due to swirl effects in oval tubes twisted about their longitudinal axis.Journal of Enhanced Heat Transfer, , 20 (4 ) ,289-304 More Information

Rojatkar P.;Kao Y.H.;Jog M.A.;Jeng S.M. (01-01-2014. ) Effect of swirler offset on aerodynamics of multiswirler arrays.Proceedings of the ASME Turbo Expo, , 4B , More Information

Yan K.;Jog M.;Ning Z. (12-01-2013. ) Nonlinear spatial instability of an annular swirling viscous liquid sheet.Acta Mechanica, , 224 (12 ) ,3071-3090 More Information

Manglik R.;Jog M.;Gande S.;Ravi V. (08-26-2013. ) Damped harmonic system modeling of post-impact drop-spread dynamics on a hydrophobic surface.Physics of Fluids, , 25 (8 ) , More Information

Abdelaal M.;Jog M. (08-14-2013. ) Heat/mass transport in a drop translating in time-periodic electric fields.International Journal of Heat and Mass Transfer, , 66 ,284-294 More Information

Tharakan T.J.;Mukhopadhyay A.;Datta A.;Jog M.A. (06-01-2013. ) Trends in comprehensive modeling of spray formation.International Journal of Spray and Combustion Dynamics, , 5 (2 ) ,123-180 More Information

Patel P.;Manglik R.;Jog M. (12-17-2012. ) Swirl-enhanced laminar forced convection through axially twisted rectangular ducts-part 1, fluid flo.Journal of Enhanced Heat Transfer, , 19 (5 ) ,423-436 More Information

Manglik R.;Patel P.;Jog M. (12-17-2012. ) Swirl-enhanced laminar forced convection through axially twisted rectangular ducts-part 2, fluid flo.Journal of Enhanced Heat Transfer, , 19 (5 ) ,437-450 More Information

Abdelaal M.;Jog M. (12-01-2012. ) Effect of viscosity ratio on the electric-field-driven enhancement of heat/mass transfer to a spheri.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 7 (PARTS A, B, C, D ) ,673-678 More Information

Miller E.;Patnaik S.;Jog M. (12-01-2012. ) Dynamic modeling of vapor compression cycles using a novel lagrangian approach.ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, , 2 ,1023-1032 More Information

Manglik R.;Patel P.;Jog M. (12-01-2012. ) Enhanced laminar flow convection heat transfer in longitudinally twisted rectangular ducts.ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, , 2 ,95-101 More Information

Yan K.;Jog M.;Ning Z. (12-01-2012. ) Nonlinear instability analysis of an annular swirling viscous liquid sheet.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 7 (PARTS A, B, C, D ) ,2437-2444 More Information

Miller E.;Patnaik S.;Jog M. (12-01-2012. ) System dynamic modeling of vapor compression cycles.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 1 ,27-35 More Information

Abdelaal M.;Jog M. (04-01-2012. ) Heat/mass transfer from a drop translating in steady and time-periodic electric fields: External pro.International Journal of Heat and Mass Transfer, , 55 (9-10 ) ,2315-2327 More Information

Athavale A.;Manglik R.;Jog M. (03-01-2012. ) An experimental investigation of nucleate pool boiling in aqueous solutions of a polymer.AIChE Journal, , 58 (3 ) ,668-677 More Information

Abdelaal M.;Jog M. (01-15-2012. ) Steady and time-periodic electric field-driven enhancement of heat or mass transfer to a drop: Inter.International Journal of Heat and Mass Transfer, , 55 (1-3 ) ,251-259 More Information

Verma U.;Manglik R.M.;Jog M.A. (12-01-2011. ) Experimental study of effects of interfacial properties on nucleate pool boiling in water .ASME 2011 International Mechanical Engineering Congress and Exposition, IMECE 2011, , 10 (PARTS A AND B ) ,779-785

Anand S.;Lee J.;Veettil D.;Son S.;Jog M. (04-07-2011. ) Distribution of vapor inside a cylindrical minichannel with evaporative walls and its effect on drop.Journal of Thermal Science and Engineering Applications, , 3 (1 ) , More Information

Manglik R.;Huzayyin O.;Jog M. (01-01-2011. ) Fin effects in flow channels of plate-fin compact heat exchanger cores.Journal of Thermal Science and Engineering Applications, , 3 (4 ) , More Information

Jog M.;Manglik R. (12-01-2010. ) Experimental investigation of low weber number post-impact drop spreading on solid substrates.2010 14th International Heat Transfer Conference, IHTC 14, , 6 ,811-817 More Information

Huzayyin O.;Jog M.;Manglik R. (12-01-2010. ) Low Reynolds number air-flow heat transfer in trapezoidally corrugated perforated plate-fin ducts .ASHRAE Transactions, , 116 (PART 2 ) ,339-346

Huzayyin O.;Manglik R.;Jog M.;Asme M. (12-01-2010. ) Extended results for fully developed laminar forced convection heat transfer in trapezoidal channels.Journal of Thermal Science and Engineering Applications, , 2 (4 ) , More Information

Vyas S.;Manglik R.;Jog M. (01-01-2010. ) Visualization and characterization of a lateral swirl flow structure in sinusoidal corrugated-plate .Journal of Flow Visualization and Image Processing, , 17 (4 ) ,281-296 More Information

Bishara F.;Jog M.;Manglik R. (01-01-2010. ) Heat transfer and pressure drop of periodically fully developed swirling laminar flows in twisted tu.ASME International Mechanical Engineering Congress and Exposition, Proceedings, , 9 (PART B ) ,1131-1137 More Information

Huzayyin O.;Jog M.;Manglik R. (01-01-2010. ) Computational modeling of convective heat transfer in converging-diverging plate channels with fin-w.ASME International Mechanical Engineering Congress and Exposition, Proceedings, , 9 (PART B ) ,1173-1181 More Information

Manglik R.M.;Jog M.A. (12-01-2009. ) Molecular-to-large-scale heat transfer with multiphase interfaces: Current status and new directions.Journal of Heat Transfer, , 131 (12 ) ,1-11 More Information

Kasimsetty S.;Manglik R.;Jog M. (09-21-2009. ) Computational modeling of dynamics of single bubbles emanating from capillary-tube orifice in an iso.ASME International Mechanical Engineering Congress and Exposition, Proceedings, , 10 (PART C ) ,1933-1940 More Information

Venkata P.;Jog M.;Manglik R. (09-15-2009. ) Computational modeling of planar SOFC: Effects of volatile species/oxidant mass flow rate and electr.ASME International Mechanical Engineering Congress and Exposition, Proceedings, , 10 (PART A ) , More Information

Gatne K.P.;Jog M.A.;Manglik R.M. (07-21-2009. ) Surfactant-induced modification of low weber number droplet impact dynamics.Langmuir, , 25 (14 ) ,8122-8130 More Information

Jog M.;Manglik R. (01-01-2009. ) Recent research in molecular-to-large-scale heat transfer with multiphase interfaces and their appli.Journal of Heat Transfer, , 131 (12 ) ,1 More Information

Bishara F.;Jog M.;Manglik R. (01-01-2009. ) Computational simulation of swirl enhanced flow and heat transfer in a twisted oval tube.Journal of Heat Transfer, , 131 (8 ) ,1 More Information

Mandal A.;Jog M.;Xue J.;Ibrahim A. (10-01-2008. ) Flow of power-law fluids in simplex atomizers.International Journal of Heat and Fluid Flow, , 29 (5 ) ,1494-1503 More Information

Reddy G.S.;Jog M.;Sekhar J.A. (07-17-2008. ) Innovation with low-lonizationll plasma sources for enhanced aluminum processing.Key Engineering Materials, , 380 ,209-225 More Information

Ibrahim A.;Jog M. (07-01-2008. ) Nonlinear instability of an annular liquid sheet exposed to gas flow.International Journal of Multiphase Flow, , 34 (7 ) ,647-664 More Information

Subramani A.;Jog M.;Manglik R. (01-01-2008. ) Air-water ebullience systems: Visualizing single bubble to wave instability signatures.Journal of Heat Transfer, , 130 (8 ) ,1 More Information

Sanjeev A.;Huzayyin O.;Gatne K.;Manglik R.;Jog M. (01-01-2008. ) Short time impact and cooling of water droplets impinging on hydrophobic and hydrophilic surfaces.Journal of Heat Transfer, , 130 (8 ) ,1 More Information

Gatne K.;Manglik R.;Jog M. (12-01-2007. ) Molecular-scale reagent transport-induced modification of low weber number droplet impact dynamics.2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, , 1 ,741-747 More Information

Kasimsetty S.;Subramani A.;Manglik R.;Jog M. (12-01-2007. ) Theoretical modeling and experimental measurements of single bubble dynamics from a submerged orific.2007 Proceedings of the ASME/JSME Thermal Engineering Summer Heat Transfer Conference - HT 2007, , 3 ,9-17 More Information

Subramani A.;Kasimsetty S.;Manglik R.;Jog M. (12-01-2007. ) Computational and experimental characterization of single bubble dynamics in isothermal liquid pools.2007 Proceedings of the 5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007, , 2 FORA (PART B ) ,1481-1482 More Information

Ibrahim A.;Jog M. (10-01-2007. ) Nonlinear breakup model for a liquid sheet emanating from a pressure-swirl atomizer.Journal of Engineering for Gas Turbines and Power, , 129 (4 ) ,945-953 More Information

Bhagat K.;Reddy G.;Jog M.;Aust R.;Vasudevan V.;Sekhar J. (08-01-2007. ) A technique to determine the emissivity with the temperature of a Fe-5.8 Pct Al-22 pct Cr alloy.Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, , 38 (4 ) ,725-728 More Information

Yerra K.;Manglik R.;Jog M. (06-01-2007. ) Optimization of heat transfer enhancement in single-phase tubeside flows with twisted-tape inserts .International Journal of Heat Exchangers, , 8 (1 ) ,117-138

Gatne K.;Manglik R.;Jog M. (01-01-2007. ) Visualization of fracture dynamics of droplet recoil on hydrophobic surface.Journal of Heat Transfer, , 129 (8 ) ,931 More Information

Subramani A.;Jog M.;Manglik R. (01-01-2007. ) Experimental study of single-bubble dynamics in isothermal liquid pools: Effects of fluid properties.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), , 8 ,1639-1645 More Information

Ibrahim A.;Jog M. (10-01-2006. ) Effect of liquid and air swirl strength and relative rotational direction on the instability of an a.Acta Mechanica, , 186 (1-4 ) ,113-133 More Information

Reddy G.;Kandell B.;Jog M.;Sekhar J. (10-01-2006. ) Low ionization plasma sources for enhanced aluminum processing for energy savings, environmental ben .Industrial Heating, , 73 (10 ) ,49-52

Rajamani V.;Anand R.;Reddy G.;Sekhar J.;Jog M. (08-01-2006. ) Heat-transfer enhancement using weakly ionized, atmospheric pressure plasma in metallurgical applica.Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, , 37 (4 ) ,565-570 More Information

Ibrahim A.;Jog M.;Jeng S. (06-29-2006. ) Effect of liquid swirl-velocity profile on the instability of a swirling annular liquid sheet.Atomization and Sprays, , 16 (3 ) ,237-263 More Information

Rajamohan D.;Banerjee R.;Back L.;Ibrahim A.;Jog M. (06-01-2006. ) Developing pulsatile flow in a deployed coronary stent.Journal of Biomechanical Engineering, , 128 (3 ) ,347-359 More Information

Ibrahim A.;Jog M. (01-01-2006. ) Breakup model for annular liquid sheets.American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, , More Information

Ibrahim A.;Jog M. (01-01-2006. ) Nonlinear breakup of a coaxial liquid jet in a swirling gas stream.Physics of Fluids, , 18 (11 ) , More Information

Manglik R.;Jog M.;Liu Y. (01-01-2006. ) Linkage between learning styles and design engineering perceptions of undergraduate students.Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Mechanical Engineering Education, , More Information

Manglik R.;Jog M.;Liu Y. (01-01-2006. ) Linkage between learning styles and design engineering perceptions of undergraduate students.American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , More Information

Gatne K.;Jog M.;Manglik R. (01-01-2006. ) Experimental investigation of droplet impact dynamics on solid surfaces: Spreading and recoil effect .American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, ,

Manglik R.;Jog M.;Subramani A.;Gatne K. (01-01-2006. ) Mili-Scale visualization of bubble growth-translation and droplet impact dynamics.Journal of Heat Transfer, , 128 (8 ) ,736 More Information

Ibrahim A.;Jog M. (12-01-2005. ) Modeling of gas-liquid flow in pressure swirl atomizers.American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, , 261 FED ,427-436 More Information

Ibrahim A.;Jog M. (12-01-2005. ) Weakly nonlinear instability of an annular liquid sheet subjected to unequal inner and outer gas str.Energy Conversion and Resources 2005, , 2005 ,251-257 More Information

Subramanian R.;Jog M. (12-01-2005. ) Droplet heating in a direct-contact heat exchanger: Effect of electric field.American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 376 HTD (1 ) ,589-593 More Information

Rajamani V.;Anand R.;Reddy G.;Sekhar J.;Jog M. (12-01-2005. ) Enhancement of heat transfer due to plasma flow in material processing applications.American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 376 HTD (2 ) ,889-893 More Information

Subramanian R.;Jog M. (10-01-2005. ) Enhancement of heat transfer by an electric field for a drop translating at intermediate Reynolds nu.Journal of Heat Transfer, , 127 (10 ) ,1087-1095 More Information

Wen Y.;Jog M. (10-01-2005. ) Variable property, steady, axi-symmetric, laminar, continuum plasma flow over spheroidal particles.International Journal of Heat and Fluid Flow, , 26 (5 ) ,780-791 More Information

Rajamohan D.;Ibrahim A.A.;Back L.H.;Jog M.A.;Banerjee R.K. (01-01-2004. ) Evaluation of modified oscillatory shear index and recirculation zone in a deployed coronary stent .Advances in Bioengineering, BED, , 35-36

Xue J.;Jog M.;Jeng S.;Steinthorsson E.;Benjamin M. (01-01-2004. ) Effect of geometric parameters on simplex atomizer performance.AIAA Journal, , 42 (12 ) ,2408-2415 More Information

Wen Y.;Jog M. (01-01-2003. ) Effect of temperature dependent properties and particle shape on heat transfer in plasma flow.American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 374 (3 ) ,217-220 More Information

Holcomb M.;Slusher S.;Rajamohan D.;Back L.;Jog M.;Banerjee R. (01-01-2003. ) Basal to near hyperemic pulsatile flow in a deployed coronary stent.American Society of Mechanical Engineers, Bioengineering Division (Publication) BED, , 55 ,81-82 More Information

Zhang Q.;Jog M. (12-01-2002. ) Kinetic theory treatment for heat transfer in plasma spraying.American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 372 (5 ) ,21-24 More Information

Benjamin M.; Jeng S.; Jog M.; Steinthorsson E.; Xue J. (12-01-2002. ) Computational model to predict flow in simplex fuel atomizer .38th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, ,

Zhang Q.;Jog M. (01-01-2002. ) Kinetic theory treatment for heat transfer in plasma spraying.ASME International Mechanical Engineering Congress and Exposition, Proceedings, , 5 ,21-24 More Information

Samudran S.;Jog M. (12-01-2001. ) A model to evaluate heat transfer to a particle from thermal plasma .American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 369 (6 ) ,359-361

Benjamin M.; Jeng S.; Jog M.; Liao Y. (12-01-2001. ) On the mechanism of pressure-swirl airblast atomization .37th Joint Propulsion Conference and Exhibit, ,

Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. (01-01-2001. ) Advanced sub-model for airblast atomizers.Journal of Propulsion and Power, , 17 (2 ) ,411-417 More Information

Wasekar V.;Manglik R.;Jog M. (12-01-2000. ) Numerical investigation of marangoni convection around a vapor bubble in aqueous surfactant solution .American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 366 ,283-291

Liao Y.;Jeng S.;Jog M.;Benjamin M. (12-01-2000. ) The effect of air swirl profile on the instability of a viscous liquid jet.Journal of Fluid Mechanics, , 424 ,1-20 More Information

Sakman A.;Jog M.;Jeng S.;Benjamin M. (01-01-2000. ) Parametric study of simplex fuel nozzle internal flow and performance.AIAA journal, , 38 (7 ) ,1214-1218 More Information

Liao Y.;Jeng S.;Jog M.;Benjamin M. (01-01-2000. ) Instability of an annular liquid sheet surrounded by swirling airstreams.AIAA journal, , 38 (3 ) ,453-460 More Information

Liao Y.;Jeng S.;Jog M.;Benjamin M. (12-01-1999. ) Air swirl effect on the instability of a viscous liquid jet .Proceedings of the 1999 3rd ASME/JSME Joint Fluids Engineering Conference, FEDSM'99, San Francisco, California, USA, 18-23 July 1999 (CD-ROM), , 1

Verma A.;Jog M.A. (10-15-1999. ) Plasma flow over an array of particles.International Journal of Heat and Mass Transfer, , 43 (1 ) ,101-111 More Information

Jeddy F.;Jog M.;Sekhar J.;Markle R.;Sarvepalli V.;Burada R. (10-01-1999. ) Convective heating below 1000°C .Advanced Materials and Processes, , 156 (4 ) ,213-215

Fang P.;Manglik R.;Jog M. (07-31-1999. ) Characteristics of laminar viscous shear-thinning fluid flows in eccentric annular channels.Journal of Non-Newtonian Fluid Mechanics, , 84 (1 ) ,1-17 More Information

Sadasivam R.;Manglik R.M.;Jog M.A. (01-01-1999. ) Fully developed forced convection through trapezoidal and hexagonal ducts.International Journal of Heat and Mass Transfer, , 42 (23 ) ,4321-4331 More Information

Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. (01-01-1999. ) An advanced sub-model for airblast atomizer .35th Joint Propulsion Conference and Exhibit, ,

Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. (01-01-1999. ) A comprehensive model to predict simplex atomizer performance.Journal of Engineering for Gas Turbines and Power, , 121 (2 ) ,285-294 More Information

Jog M.;Alam M. (12-01-1998. ) Transport Phenomena in Rapid Solidification Processing .American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 361-4 ,255

Verma A.;Jog M.A. (12-01-1998. ) Analysis of heat transfer to a spectrum of particles in plasma spray coating process .American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 361-364 (4 ) ,287-294

Benjamin M.; Jeng S.; Jog M.; Liao Y. (12-01-1998. ) Atomization of a liquid jet under swirling air stream.SAE Technical Papers, , More Information

Hader M.;Jog M. (01-01-1998. ) Effect of drop deformation on heat transfer to a drop suspended in an electrical field.Journal of Heat Transfer, , 120 (3 ) ,682-689 More Information

Hader M.;Jog M. (01-01-1998. ) Continuum plasma flow past a sphere.Physics of Plasmas, , 5 (4 ) ,902-909 More Information

Harms T.;Jog M.;Manglik R. (01-01-1998. ) Effects of temperature-dependent viscosity variations and boundary conditions on fully developed lam.Journal of Heat Transfer, , 120 (3 ) ,600-605 More Information

Jeng S.M.;Jog M.A.;Benjamin M.A. (01-01-1998. ) Computational and experimental study of liquid sheet emanating from simplex fuel nozzle.AIAA Journal, , 36 (2 ) ,201-207 More Information

Liao Y.;Jeng S.M.;Jog M.A.;Benjamin M.A. (01-01-1998. ) Instability of an annular liquid sheet surrounded by swirling air streams .34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, ,

Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. (01-01-1998. ) A comprehensive model to predict simplex atomizer performance.Proceedings of the ASME Turbo Expo, , 3 , More Information

Sakman A.T.;Jha S.;Jog M.A.;Jeng S.M.;Benjamin M.A. (01-01-1998. ) A numerical parametric study of simplex fuel nozzle internal flow and performance .34th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, ,

Liao Y.;Sakman A.;Jeng S.;Jog M.;Benjamin M. (01-01-1998. ) Comprehensive model to predict simplex atomizer performance .American Society of Mechanical Engineers (Paper), , (GT ) ,

Harms T.;Jog M.;Manglik R. (12-01-1997. ) Numerical predictions of laminar fully developed forced convection in a semi-circular duct with temp .American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 348 ,31-38

Hader M.A.;Verma A.;Jog M.A. (12-01-1997. ) Numerical investigation of heat transfer to a non-spherical drop suspended in an electric field: Int .American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 342 ,59-66

Jog M.;Hader M. (01-01-1997. ) Transient heat transfer to a spheroidal liquid drop suspended in an electric field.International Journal of Heat and Fluid Flow, , 18 (4 ) ,411-418 More Information

Jeng S.;Jog M.;Benjamin M. (01-01-1997. ) Computational and experimental study of liquid sheet emanating from simplex fuel nozzle .35th Aerospace Sciences Meeting and Exhibit, ,

Klemick S.;Jog M.;Ayyaswamy P. (01-01-1997. ) Numerical evaluation of heat clearance properties of a radiatively heated biological tissue by adapt.Numerical Heat Transfer; Part A: Applications, , 31 (5 ) ,451-467 More Information

Holtzclaw D.;Sakman T.;Jeng S.;Jog M.;Benjamin M. (01-01-1997. ) Investigation of flow in a simplex fuel nozzle .33rd Joint Propulsion Conference and Exhibit, ,

Jog M.;Ayyaswamy P.;Cohen I. (09-01-1996. ) Effect of elasto-plastic behavior of epoxy on thermal stresses in TAB packaging .International Journal of Microcircuits and Electronic Packaging, , 19 (3 ) ,308-315

Jog M.;Ayyaswamy P.;Cohen I. (01-25-1996. ) Evaporation and combustion of a slowly moving liquid fuel droplet: Higher-order theory.Journal of Fluid Mechanics, , 307 ,135-165 More Information

Jog M.;Huang L. (01-01-1996. ) Transient heating and melting of particles plasma spray coating process.Journal of Heat Transfer, , 118 (2 ) ,471-477 More Information

Jog M. (12-01-1995. ) Analysis of heat transfer to a spherical particle from continuum plasma.Journal of Applied Physics, , 78 (3 ) ,1424-1429 More Information

Jog M.;Huang L. (12-01-1995. ) Analysis of particle heating in plasma spray coating process .American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 317-2 ,503-509

Jog M.;Huang L. (12-01-1994. ) Effect of particle loading on heat transfer in plasma coating process .American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, , 201 ,25-31

Jog M.;Cohen I.;Ayyaswamy P. (01-01-1994. ) Heat transfer in wire bonding process.Journal of Electronic Packaging, Transactions of the ASME, , 116 (1 ) ,44-48 More Information

Jog M.;Ayyaswamy P.;Cohen I. (12-01-1993. ) Influence of elasto-plastic behavior of epoxy on stresses and strains in tab packaging .American Society of Mechanical Engineers, EEP, , 4-1 ,83-89

Jog M.;Cohen I.;Ayyaswamy P. (01-01-1993. ) Analysis and simulation of thermal transients and resultant stresses and strains in TAB packaging.Journal of Electronic Packaging, Transactions of the ASME, , 115 (1 ) ,34-38 More Information

Stauffer T.R.;Jog M.;Ayyaswamy P. (01-01-1992. ) The effective thermal conductivity of multi foil insulation as a function of temperature and pressur .AIAA 27th Thermophysics Conference, 1992, ,

Jog M.;Cohen I.;Ayyaswamy P. (01-01-1992. ) Electrode heating in a wire-to-plane arc.Physics of Fluids B, , 4 (2 ) ,465-472 More Information

Jog M.;Cohen I.;Ayyaswamy P. (12-01-1991. ) Heat transfer in electric arc welding .American Society of Mechanical Engineers, Production Engineering Division (Publication) PED, , 51 ,135-142

Jog M.;Cohen I.;Ayyaswamy P. (12-01-1991. ) Analysis and simulation of thermal transients and resultant stresses and strains in tab packaging .American Society of Mechanical Engineers, Applied Mechanics Division, AMD, , 131 ,137-142

Jog M.;Cohen I.;Ayyaswamy P. (01-01-1991. ) Breakdown of a wire-to-plane discharge: Transient effects.Physics of Fluids B, , 3 (12 ) ,3532-3536 More Information

Huang L.;Jog M.;Cohen I.;Ayyaswamy P. (01-01-1991. ) Effect of polarity on heat transfer in the ball formation process.Journal of Electronic Packaging, Transactions of the ASME, , 113 (1 ) ,33-39 More Information

Huang L.;Jog M.;Cohen I.;Ayyaswamy P. (12-01-1990. ) Effect of polarity on heat transfer in the ball formation process .American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, , 146 ,1-8

Lin, K.-T., Shi, D., Jog, M. A., and Manglik, R. M., (2023. ) Revisiting Forced Convective Enhanced Heat Transfer in Offset-Strip-Fin Cores and Rationalized Performance Prediction Correlations.ASME Journal of Heat and Mass Transfer, , 145 (9 ) ,091003 More Information

Kannan, S., Jog, M. A., and Manglik, R.M., (2023. ) Experimental Study of Enhanced Heat Transfer in Phase Change Material Based Thermal Energy Storage in Compact Heat Exchangers .Proceedings of the Summer Heat Transfer Conference, , Paper Number SHTC2023-107111 ,

Kannan S.; Jog M.A.; Manglik R.M. (01-01-2019. ) The effects of nucleating agents on phase transition of a salt hydrate phase-change material for the.ASME 2019 Heat Transfer Summer Conference, HT 2019, collocated with the ASME 2019 13th International Conference on Energy Sustainability, , More Information

Lin, K.-T., Shi, D., Jog, M. A., and Manglik, R. M., (2023. ) Revisiting Forced Convective Enhanced Heat Transfer in Offset-Strip-Fin Cores and Rationalized Performance Prediction Correlations.ASME Journal of Heat and Mass Transfer, , 145 (9 ) ,091003 More Information

Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. (01-01-2019. ) Three-dimensional computations for forced convection of air in offset-strip fin channels: Effects of .ASHRAE Transactions, , 125 ,172-180

Rajendran, S., Jog, M. A., and Manglik, R. M. (2023. ) Predicting Splash of a Drop Impacting a Thin Liquid Film.Langmuir, , 39 (41 ) ,14764-14773 More Information

Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. (02-01-2021. ) Characterization and Scaling of Forced Convective Swirl in Sinusoidal Wavy-Plate-Fin Cores of Compac.Journal of Heat Transfer, , 143 (2 ) , More Information

Kannan, S., Jog, M. A., and Manglik, R.M., (2024. ) High Power Density Thermal Energy Storage with Phase Change Material in Enhanced Compact Heat Exchangers.ASME Journal of Heat and Mass Transfer, , 146 (5 ) ,052402 More Information

Lin K.T.; Shi D.; Jog M.A.; Manglik R.M. (12-01-2020. ) General Correlations for Laminar Flow Friction Loss and Heat Transfer in Plain Rectangular Plate-Fin.Journal of Heat Transfer, , 142 (12 ) , More Information

Chen H.; Jog M.A.; Evans D.E.; Turkevich L.A. (09-01-2021. ) Numerical investigation of powder aerosolization in a rotating drum apparatus.Powder Technology, , 390 ,62-72 More Information

Manoharan S.; Manglik R.M.; Jog M.A. (10-01-2021. ) Wetting and Capillarity Effects on Bubble Formation from Orifice Plates Submerged in Pools of Water.Journal of Heat Transfer, , 143 (10 ) , More Information

Rajendran S.; Manglik R.M.; Jog M.A. (06-01-2022. ) New Property Averaging Scheme for Volume of Fluid Method for Two-Phase Flows with Large Viscosity Ra.Journal of Fluids Engineering, Transactions of the ASME, , 144 (6 ) , More Information

Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. (05-01-2022. ) Role of Three-Dimensional Swirl in Forced Convection Heat Transfer Enhancement in Wavy-Plate-Fin Cha.Journal of Heat Transfer, , 144 (5 ) , More Information

Chen H.; Jog M.A.; Turkevich L.A. (01-01-2023. ) Computational fluid dynamics simulations of aerosol behavior in a high-speed (Heubach) rotating drum.Particuology, , 72 ,68-80 More Information

Kannan S.; Kumar N.; Jog M.A.; Manglik R.M. (11-02-2022. ) Phase-Transition Efficacy and Material Compatibility with Thermal Cycling of Lithium Nitrate Trihydr.Industrial and Engineering Chemistry Research, , 61 (43 ) ,16341-16351 More Information

Shi D.; Lin K.T.; Jog M.A.; Manglik R.M. (04-01-2023. ) Experimental and Computational Study of Enhanced Forced Convection Heat Transfer in Novel Slotted Wa.Journal of Heat Transfer, , 145 (4 ) , More Information

Chen H.; Turkevich L.A.; Jog M.A.; Ghia U. (07-01-2023. ) Numerical investigation of powder aerosolization in a mining rock dust dispersion chamber.Journal of Loss Prevention in the Process Industries, , 83 , More Information

2018 Honorary Member, Pi Tau Sigma

2016 -2022 Associate Editor, ASME Journal of Heat Transfer

2015 Distinguished Researcher Award, CEAS, University of Cincinnati

2015 Robert Hundley Award for Excellence in Teaching

2014 Member, Board of Directors, Institute of Liquid Atomization and Spray Systems (ILASS-Americas)

2014 -2016 Chair, ASME-HTD K-15 Technical Committee on Transport Phenomena in Manufacturing and Materials Processing

2013 Professor of the Semester, CEAS, University of Cincinnati

2011 Fellow of the American Society of Mechanical Engineers (ASME)

2011 Elected to the Fellows of the Graduate School, University of Cincinnati

2011 UC College of Engineering and Applied Science, Master Educator Award

2010 -2018 Editor, Journal of Enhanced Heat Transfer

2010 Conference Chair, ILASS-Americas 22nd Annual Conference, May 2010

2010 Conference Chair, ISHMT-ASME Heat and Mass Transfer Conference, Mumbai, India, January 2010

2007 College of Engineering, Master Engineering Educator Award

2004 Sigma Xi Outstanding Investigator Award

2004 Robert Hundley Award for Excellence in Teaching

2003 Tau Beta Pi - Eminent Engineer

2001 BP-Amoco Teaching Excellence Award

2000 College of Engineering Research Award for Young Faculty

1998 CAREER Award, National Science Foundation

1997 Faculty Achievement Award, University of Cincinnati

1994 Research Initiation Award, National Science Foundation

1993 John Goff Award, University of Pennsylvania

1979 -1987 National Talent Search (NTS) Scholarship, NCERT, India

2021 -2027 Member, Executive Committee, ASME Heat Transfer Division

2021 Conference Co-Chair, ASME Summer Heat Transfer Conference

2022 Conference Co-Chair, ASME Summer Heat Transfer Conference

2022 Neil Wandmacher Award for Teaching Excellence

2023 Conference Track Chair, ASME IMECE, Heat Transfer & Thermal Engineering Track

2024 Provost's Award for Faculty Excellence

2024 ASME Heat Transfer Memorial Award - General

US Patent # 9242256 "Aerosol Dispenser Assembly Having VOC-Free Propellant and Dispensing Mechanism Therefor" Awarded 2016