J. Kim

J. Kim

Professor, Department Head

Rhodes Hall

598B

CEAS - Mechanical Eng - 0072

Professional Summary

Dr. Jay Kim is a Professor of Mechanical Engineering in the Department of Mechanical and Materials Engineering.  His research and teaching interests are vibration of structures, rotordynamics, acoustics, noise and vibration controls, and engineerng education. He is currently serving as the Department Head, director of Occupational Safety and Health Engineering program and education director of Siemens Simulation Technology Center.     

Education

Ph.D., Purdue University, West Lafayette, Indiana, 1988 (Mechanical Engineering)

M.S., Korea Advanced Institute of Science and Technology (KAIST), Sceience Town, S. Korea, 1979 (Production Engineering)

B.S., Seoul National University, Seoul, S. Korea, 1977 (Mechanical Engineering)

Research Support

Grant: #1 R21 OH008510-01A1 Investigators:Kim, J. 07-01-2006 -12-31-2008 National Institute for Occupational Safety and Health Development of Risk Assessment Method for Complex Noise Role:PI $328,657.00 Closed Level:Federal

Grant: #211-2006-M-16048 Investigators:Kim, J. 03-01-2006 -12-31-2007 National Institute for Occupational Safety and Health Development of an Acoustic Shock Tube Role:PI $24,000.00 Closed Level:Federal

Grant: #copeland Investigators:Kim, J. 03-09-2006 -08-08-2006 Copeland Corporation Development of NI Labview System for Compressor Sound and Vibration Testing Role:PI $30,000.00 Closed Level:Industry

Grant: #PO #211-2004-M-06604 Investigators:Kim, J. 03-09-2004 -12-31-2004 National Institute for Occupational Safety and Health Measurement and Characterization of Noise from Power Tools Role:PI $49,980.00 Closed Level:Federal

Grant: #211-2004-M-08668 Investigators:Kim, J. 07-23-2004 -10-15-2004 National Institute for Occupational Safety and Health Measurement of Sound Power and Sound Pressure Levels from Various Pieces of Electrically-powered Tools Role:PI $11,011.00 Closed Level:Federal

Grant: #211-2004-M-10217 Investigators:Kim, J. 08-30-2004 -12-31-2005 National Institute for Occupational Safety and Health Modification of Hearing Protector Fit Test Software Role:PI $24,500.00 Closed Level:Federal

Grant: #211-2005-M-11454 Investigators:Kim, J. 02-04-2005 -12-31-2005 National Institute for Occupational Safety and Health Measurement and Characterization of Noise from Power Tools Role:PI $49,980.00 Closed Level:Federal

Grant: #TAA Investigators:Kim, J. 01-01-2005 -12-31-2005 Pohang University of Science and Technology Hot-Rolled Steel Plate Analysis Role:PI $45,000.00 Closed Level:Foreign Institution of Higher Education

Grant: #0000336272 Investigators:Kim, J. 12-26-2002 -12-31-2003 National Institute for Occupational Safety and Health Measurement and Characterization of Noise from Power Tools Role:PI $55,000.00 Closed Level:Federal

Grant: #UC Arvin 100699 Investigators:Kim, J. 09-01-1999 -08-31-2001 ArvinMeritor Characterization of Dynamic and Acoustic Properties of Double Layered Shells for Optimal Design of Automotive Mufflers Role:PI $59,500.00 Closed Level:Industry

Grant: #PO 0000236290 Investigators:Kim, J. 05-01-2001 -11-30-2002 National Institute for Occupational Safety and Health Assessment of Sound Power Levels from Powered Hand Tools Used in the Construction Industry Role:PI $73,500.00 Closed Level:Federal

Grant: #DUE-0633560 Investigators:Allemang, Randall; Kim, J.; Lim, Teik; Rost, Robert 07-01-2006 -06-30-2010 National Science Foundation Engineering Education Through Degree-long Project Experience Role:PI $150,000.00 Closed Level:Federal

Grant: #66636 Investigators:Buncher, Charles; Kennerly, Susan; Kim, J.; Miller, Elaine; Yap, Tracey 09-01-2009 -08-31-2011 Robert Wood Johnson Foundation Interdisciplinary Mobility Team Approach to Reduction of Facility-Acquired Pressure Ulcers Role:Collaborator $299,963.00 Closed Level:Private Non-Profit

Grant: #T42 OH008432 Investigators:Banerjee, Rupak; Bhattacharya, Amit; Burroughs, Guy; Cardarelli, John; Davis, Kermit; Davis, Linda Sue; Genter, Mary Beth; Gillespie, Gordon; Grinshpun, Sergey; Haynes, Erin; Huston, Thomas; Jarrell, Judy; Jones, James; Kennerly, Susan; Kim, J.; Kupferle, Margaret; Lemasters, Grace; Lim, Teik; Lockey, James; McKay, Roy; Meyer, Mary-Ursula; Reid, Jon; Reponen, Tiina; Rice, Carol; Ross, Clara; Schulz, Mark; Shanov, Vesselin; Son, Sang Young; Spitz, Henry; Stuebbe, Philip; Talaska, Glenn; Yap, Tracey 07-01-2011 -06-30-2016 National Institute for Occupational Safety and Health Education and Research Center Role:Collaborator $6,006,722.00 Active Level:Federal

Grant: #NSF EEC-1343568 Investigators:Angelopoulos, Anastasios; Kim, J.; Schulz, Mark; Shanov, Vesselin; Shi, Donglu 12-01-2013 -11-30-2015 National Science Foundation Development of Nanotechnology Minor Focused on Nano Biomedicine and Sustainable Energy Role:Collaborator $199,998.00 Active Level:Federal

Grant: #Membership Agreement / W31P4Q-14-2-0001 Investigators:Anand, Sundararaman; Huang, Hongdao Samuel; Kim, J.; Lee, Jay; Meenakshi, Sundaram Murali; Vemaganti, Kumar 01-01-2015 -12-31-2019 Department of Defense Digital Manufacturing and Design Innovation (DMDI) - Intelligent Machining Role:Collaborator $.00 Active Level:Federal

Grant: #T42OH008432 Investigators:Bhattacharya, Amit; Davis, Kermit; Freeman, Andrew; Kim, J.; Reponen, Tiina; Reutman, Susan; Talaska, Glenn 07-01-2016 -06-30-2021 National Institute for Occupational Safety and Health Education and Research Center (ERC - Cincinnati) Role:Collaborator $1,702,965.00 Active Level:Federal

Grant: #75D30118C00969 Investigators:Kim, J. 07-01-2018 -06-30-2019 National Institute for Occupational Safety and Health Developing, Evaluating, and Promoting Noise Control Strategies Role:PI $46,115.00 Awarded Level:Federal

Grant: #2018 Research Project Contract Investigators:Kim, J. 08-01-2018 -07-31-2019 Hyundai Motor Company Development of an Advanced System of Rating of Squeak Noises from Automotive Components Role:PI $130,000.00 Active Level:Foreign Industry

Publications

Peer Reviewed Publications

Kim J.; Lee J. (06-01-2003. )Study on sound transmission characteristics of a cylindrical shell using analytical and experimental.Applied Acoustics, ,64 (6 ),611-632

Kim J.; Lee G. (06-01-2018. )Investigation of the Stability of a Squeak Test Apparatus Based on an Analytical and Finite Element .Journal of Vibration and Acoustics, Transactions of the ASME, ,140 (3 ),

Kim J.; Lee G. (01-01-2018. )Design of a test system for quantitative rating of squeak propensity of material pairs .INTER-NOISE 2018 - 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering, ,

Choi S.; Kim J.; Lee G. (01-01-2018. )A study on possible causes of squeak noises in the hand-grab bar assembly of a vehicle .INTER-NOISE 2018 - 47th International Congress and Exposition on Noise Control Engineering: Impact of Noise Control Engineering, ,

Kim J.; Lee G. (12-01-2017. )Design Parameter Study of a New Test Apparatus Developed for Quantitative Rating of Squeak Propensit.Journal of Vibration and Acoustics, Transactions of the ASME, ,139 (6 ),

Kim J.; Lee G.; Steen T. (10-01-2017. )Application of Computational Fluid Dynamics Simulation to Squeeze Film Damper Analysis.Journal of Engineering for Gas Turbines and Power, ,139 (10 ),

Kim J.; Lee G. (08-21-2016. )Development of a test apparatus that consistently generates squeak to rate squeak propensity of a pa .Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, ,5311-5316

Kim J.; Lee G. (08-21-2016. )Analysis of a new squeak test apparatus developed for objective rating of squeak propensity and buil .Proceedings of the INTER-NOISE 2016 - 45th International Congress and Exposition on Noise Control Engineering: Towards a Quieter Future, ,5317-5323

Jayakumar V.; Kim J.; Zechmann E. (03-01-2015. )Identification of noise sources and design of noise reduction measures for a pneumatic nail gun.Noise Control Engineering Journal, ,63 (2 ),159-168

Kim J.; Kim K.; Lee G. (01-01-2015. )An analytical study of the mode-coupling effect on the instability of friction induced vibrations to .INTER-NOISE 2015 - 44th International Congress and Exposition on Noise Control Engineering, ,

Kim J.; Kim K.; Lee G. (01-01-2015. )An algorithm to automatically detect and distinguish squeaks and rattles .Sound and Vibration, ,49 (9 ),8-10

Kim J.; Kim K.; Lee G. (01-01-2015. )Development of an algorithm to automatically detect and distinguish squeak and rattle noises.SAE Technical Papers, ,2015-June ,

Choi J.; Hong S.; Kim J.; Kim K.; Kim Y.; Lee G.; Lee S. (01-01-2015. )A case study: Application of analytical and numerical techniques to squeak and rattle analysis of a .SAE Technical Papers, ,2015-June ,

Banerjee R.; Bhattacharya A.; Goenka S.; Kim B.; Kim J.; Peelukhana S.; Stringer K. (01-01-2015. )Effect of higher frequency components and duration of vibration on bone tissue alterations in the ra.Industrial Health, ,53 (3 ),245-259

Alvarez N.; Bhattacharya A.; Jetter B.; Kim J.; Schulz M.; Shanov V.; Sullivan J.; Vemaganti K. (01-01-2015. )Carbon nanotube fabric cooling system for firefighters and first responders: Modeling and simulation.Journal of Fiber Bioengineering and Informatics, ,8 (1 ),1-12

Kim J.; Lee G.; Lee T. (01-01-2014. )The rolling scotch yoke mechanism applied to a small air compressor for oil-free operations.International Journal of Precision Engineering and Manufacturing, ,15 (1 ),97-103

Banerjee R.; Goenka S.; Kim B.; Kim J.; Peelukhana S.; Stringer K. (12-01-2013. )Dependence of higher frequency components on bone tissue alterations in the rat-tail model.ASME 2013 Summer Bioengineering Conference, SBC 2013, ,1 B ,

Banerjee R.; Goenka S.; Kim J.; Peelukhana S.; Stringer K. (09-09-2013. )Dependence of vascular damage on higher frequency components in the rat-tail model.Industrial Health, ,51 (4 ),373-385

Kim J.; Lim A.; Zechmann E. (01-01-2013. )Development of an experimental method to estimate the operating force of a hand-held power tool util.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), ,4 A ,

Banerjee R.; Kim J.; Pattnaik S. (04-09-2012. )Spatial resonance in a small artery excited by vibration input as a possible mechanism to cause hand.Journal of Sound and Vibration, ,331 (8 ),1951-1960

Banerjee R.; Goenka S.; Kim J.; Peelukhana S.; Stringer K. (12-01-2011. )Endothelial cell injury under high frequency vibration in the rat-tail model.ASME 2011 Summer Bioengineering Conference, SBC 2011, ,(PARTS A AND B ),951-952

Chi S.; Kim J.; Lee G.; Lee T. (07-27-2011. )Miniature air compressor design based on cross-slider mechanism.Key Engineering Materials, ,486 ,17-20

Kim J.; Pattnaik S. (06-01-2011. )New approach to model the hand-arm system for analysis of musculoskeletal disorders .Canadian Acoustics - Acoustique Canadienne, ,39 (2 ),54-55

Banerjee R.; Kim J.; Pattnaik S. (06-01-2011. )Analysis of spatial resonance in a small vessel to study vibration-induced digital vascular disorder .Canadian Acoustics - Acoustique Canadienne, ,39 (2 ),12-13

Goley G.; Kim J.; Song W. (03-01-2011. )Kurtosis corrected sound pressure level as a noise metric for risk assessment of occupational noises.Journal of the Acoustical Society of America, ,129 (3 ),1475-1481

Kim J.; Pattnaik S. (12-01-2010. )A lumped parameter vibration model developed based on a realistic kinematic description of the hand-.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), ,2 ,809-813

Allemang R.; Kim J.; Lim T.; Rost B. (12-01-2010. )Engineering education through degree-long project, a new project based learning approach.ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), ,6 ,443-449

Kim H.; Kim J.; Lee J.; Lee S.; Seo J. (12-01-2010. )Prediction of underwater noise for environmental impacts: Evaluation of a commercial vessel and offs .Transactions - Society of Naval Architects and Marine Engineers, ,118 ,468-475

Chandrika U.; Kim J. (10-11-2010. )Development of an algorithm for automatic detection and rating of squeak and rattle events.Journal of Sound and Vibration, ,329 (21 ),4567-4577

Kim J.; Pattnaik S. (08-10-2010. )Prediction of formation of wavy surfaces in rolled plates by post-buckling analysis.Journal of Applied Mechanics, Transactions ASME, ,77 (4 ),1-8

Chandrika U.; Kim J. (12-01-2009. )Development of a new squeak and rattle detection algorithm.SAE International Journal of Passenger Cars - Mechanical Systems, ,2 (1 ),1424-1430

Kim H.; Kim J.; Kim T.; Lee I.; Selamet A. (12-01-2009. )Design of a multi-chamber silencer for turbocharger noise.SAE International Journal of Passenger Cars - Mechanical Systems, ,2 (1 ),1339-1344

Egan J.; George J.; Kim J. (09-01-2009. )Study of sound transmission through muffler sidewall by analytical, numerical and experimental metho.Noise Control Engineering Journal, ,57 (5 ),434-441

Cha D.; Joo Y.; Kim J. (06-01-2009. )Analysis of the combustion instability of a model gas turbine combustor by the transfer matrix metho.Journal of Mechanical Science and Technology, ,23 (6 ),1602-1612

Kim J.; Ozgen G. (02-06-2009. )Error analysis and feasibility study of dynamic stiffness matrix-based damping matrix identification.Journal of Sound and Vibration, ,320 (1-2 ),60-83

Kim J.; Murphy W.; Song S.; Song W.; Zhu X. (01-01-2009. )Development of a noise metric for assessment of exposure risk to complex noises. The Journal of the Acoustical Society of America, ,126 (2 ),703-712

Kim J.; Song W. (12-01-2008. )Comparative study on the responses of human middle ear models .Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08, ,2 ,1036-1046

Egan J.; George J.; Kim J. (12-01-2008. )Prediction of sound transmitted through muffler side walls .Institute of Noise Control Engineering of the USA - 23rd National Conference on Noise Control Engineering, NOISE-CON 08 and Sound Quality Symposium, SQS 08, ,3 ,1436-1445

Kim J.; Zhu X. (12-01-2007. )Application of analytic wavelet transform to transient signal analyses.SAE Technical Papers, ,

Kim J.; Ozgen G. (11-20-2007. )Direct identification and expansion of damping matrix for experimental-analytical hybrid modeling.Journal of Sound and Vibration, ,308 (1-2 ),348-372

Dong R.; Hayden C.; Joon Song W.; Kim J.; Welcome D. (11-20-2007. )Time-frequency characterization of hand-transmitted, impulsive vibrations using analytic wavelet tra.Journal of Sound and Vibration, ,308 (1-2 ),98-111

Kadam P.; Kim J. (11-06-2007. )Experimental formulation of four poles of three-dimensional cavities and its application.Journal of Sound and Vibration, ,307 (3-5 ),578-590

Kim J.; Murphy W.; Zhu X. (12-01-2006. )Study of the effect of hearing protectors for military noises based on time-frequency analysis by an .Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006, ,4 ,2318-2327

Dong R.; Hayden C.; Kim J.; Song W.; Welcome D. (12-01-2006. )Study of hand-arm transmitted impulsive vibrations using analytic wavelet transform .Institute of Noise Control Engineering of the USA - 35th International Congress and Exposition on Noise Control Engineering, INTER-NOISE 2006, ,5 ,2884-2893

Kim J. (06-01-2006. )Rotation effects on vibration of structures seen from a rotating beam simply supported off the rotat.Journal of Vibration and Acoustics, Transactions of the ASME, ,128 (3 ),328-337

Kang I.; Kim J.; Schulz M.; Shanov V.; Shi D. (06-01-2006. )A carbon nanotube strain sensor for structural health monitoring.Smart Materials and Structures, ,15 (3 ),737-748

Boerio J.; Gollapudi R.; Heung Y.; Hurd D.; Kang I.; Kim J.; Kirikera G.; Lee J.; Mall S.; Narasimhadevara S.; Ruggles-Wren M.; Schulz M.; Shanov V.; Shi D.; Subramaniam S. (05-30-2006. )Introduction to carbon nanotube and nanofiber smart materials.Composites Part B: Engineering, ,37 (6 ),382-394

Kim J.; Zhu X. (01-01-2006. )Application of analytic wavelet transform to analysis of highly impulsive noises.Journal of Sound and Vibration, ,294 (4 ),841-855

Kim J.; Ozgen G. (12-01-2005. )Further developments in the dynamic stiffness matrix (DSM) based direct damping identification metho.SAE Technical Papers, ,

Kim J.; Ozgen G. (12-01-2005. )Applications of the dynamic stiffness matrix (DSM) based direct damping identification method.SAE Technical Papers, ,

Kim J.; Zhu X. (12-01-2005. )Application of the analytic wavelet transform for time-frequency analysis of impulsive sound signals.SAE Technical Papers, ,

Kadam P.; Kim J. (12-01-2005. )Analytic, numerical and experimental techniques to formulate four-pole matrices for hybrid system mo .19th National Conference on Noise Control Engineering 2005, Noise-Con 05, ,2 ,1284-1291

Kim J.; Ozgen G. (12-01-2005. )Identification of damping from experimental dynamic stiffness matrix: Error analysis .Conference Proceedings of the Society for Experimental Mechanics Series, ,

Boerio J.; Gollapudi R.; Hurd D.; Kang I.; Kim J.; Lee J.; Schulz M.; Shanov V.; Shi D.; Subramaniam S.; Yeo-Heung Y. (10-03-2005. )Multifunctional carbon nanofiber/nanotube smart materials.Proceedings of SPIE - The International Society for Optical Engineering, ,5763 ,184-195

Berger E.; Kim J.; Lee J. (05-20-2005. )Feasibility study of a tunable friction damper.Journal of Sound and Vibration, ,283 (3-5 ),707-722

Hylok J.; Kim J.; Phillips A. (12-01-2003. )Experimental identification of distributed damping matrices part 1: Analytical case studies.SAE Technical Papers, ,

Hylok J.; Kim J.; Phillips A. (12-01-2003. )Experimental identification of distributed damping matrices part 2: Experimental case studies.SAE Technical Papers, ,

Allemang R.; Kim J.; Lim T. (12-01-2003. )Automotive NVH research instrumentation and infrastructure at UC-SDRL.SAE Technical Papers, ,

Allemang R.; Kim J.; Schulz M.; Stelzer G. (12-01-2003. )A magnetorheological semi-active isolator to reduce noise and vibration transmissibility in automobi.Journal of Intelligent Material Systems and Structures, ,14 (12 ),743-765

Kim J.; Pujara K. (11-20-2003. )Letter to the editor (multiple letters).Journal of Sound and Vibration, ,268 (2 ),427-428

Kim J.; Lee J. (04-04-2002. )Analysis and measurement of sound transmission through a double-walled cylindrical shell.Journal of Sound and Vibration, ,251 (4 ),631-649

Kim J.; Lee J. (03-28-2002. )Sound transmission through periodically stiffened cylindrical shells.Journal of Sound and Vibration, ,251 (3 ),431-456

Kim J.; Lee J. (03-21-2002. )Analysis of sound transmission through periodically stiffened panels by space-harmonic expansion met.Journal of Sound and Vibration, ,251 (2 ),349-366

Grinker S.; Kim J.; Lee J. (12-01-2001. )Development of a new damping matrices identification method and its applications.SAE Technical Papers, ,

Kim H.; Kim J.; Lee J. (12-01-2001. )Sound transmission through cylindrical double-walled shells sandwiching porous material.SAE Technical Papers, ,

Kim J.; Kothamasu V.; Lee J. (12-01-2001. )Analysis and experimental study of the mean flow effect on the sound transmission through a cylindri.SAE Technical Papers, ,

Kim H.; Kim J.; Lee J. (11-26-2001. )Simplified method to solve sound transmission through structures lined with elastic porous material.Journal of the Acoustical Society of America, ,110 (5 I ),2282-2294

Kim J.; Lee J. (09-20-2001. )Development and validation of a new experimental method to identify damping matrices of a dynamic sy.Journal of Sound and Vibration, ,246 (3 ),505-524

Kim J.; Soedel W.; Zhou W. (06-01-2001. )New iterative scheme in computer simulation of positive displacement compressors considering the eff.Journal of Mechanical Design, Transactions of the ASME, ,123 (2 ),282-288

Kim J.; Lee J. (02-22-2001. )Identification of damping matrices from measured frequency response functions.Journal of Sound and Vibration, ,240 (3 ),545-565

Kim J.; Lee J. (01-01-2001. )Development and validation of a new experimental method to identify damping matrices of a dynamic sy.Proceedings of SPIE - The International Society for Optical Engineering, ,4331 ,21-32

Kim H.; Kim J.; Lee J. (01-01-2001. )Development of enhanced Wigner-Ville distribution function.Mechanical Systems and Signal Processing, ,15 (2 ),367-398

Kim J.; Kothamasu V.; Lee J. (01-01-2001. )Experimental study of the mean flow effect on the sound transmission through cylindrical shell of an .Proceedings of the International Modal Analysis Conference - IMAC, ,2 ,1180-1185

Kim H.; Kim J.; Lee J. (01-01-2000. )Enhancement of Wigner-Ville Distribution Function .Proceedings of the International Modal Analysis Conference - IMAC, ,1 ,51-57

Kim H.; Kim J.; Lee J. (01-01-2000. )Time frequency representations of signals: STFT, Wigner-Ville & wavelet transformation .Proceedings of the International Modal Analysis Conference - IMAC, ,1 ,264-270

Kim H.; Kim J.; Lee J. (01-01-2000. )Time frequency representations of signals: STFT, Wigner-Ville & Wavelet Transformation .Proceedings of SPIE - The International Society for Optical Engineering, ,4062 ,

Kim J.; Zhou W. (01-07-1999. )Formulation of four poles of three-dimensional acoustic systems from pressure response functions wit.Journal of Sound and Vibration, ,219 (1 ),89-103

Ding J.; Kim J. (01-01-1998. )Qualitative study on the brake squeal problem using simple lumped parameter systems .Proceedings of the International Modal Analysis Conference - IMAC, ,2 ,980-986

Crafton D.; Ding J.; Kim J. (12-01-1997. )Noise source identification in a highly reverberant enclosure by inverse frequency response function.SAE Technical Papers, ,

Crafton D.; Ding J.; Kim J. (12-01-1997. )Noise source identification in highly reverberant enclosures by the IFRF method .Proceedings of the International Modal Analysis Conference - IMAC, ,2 ,1686-1691

Kim J.; Wang C. (06-05-1997. )The dynamic analysis of a thin beam impacting against a stop of general three-dimensional geometry.Journal of Sound and Vibration, ,203 (2 ),237-249

Hong K.; Kim J. (05-02-1996. )New analysis method for general acoustic-structural coupled systems.Journal of Sound and Vibration, ,192 (2 ),465-480

Kim J.; Wang C. (04-18-1996. )New analysis method for a thin beam impacting against a stop based on the full continuous model.Journal of Sound and Vibration, ,191 (5 ),809-823

Hong K.; Kim J. (12-14-1995. )Analysis of free vibration of structural-acoustic coupled systems, Part I: Development and verificat.Journal of Sound and Vibration, ,188 (4 ),561-575

Hong K.; Kim J. (12-14-1995. )Analysis of free vibration of structural-acoustic coupled systems, part ii: Two- and three-dimension.Journal of Sound and Vibration, ,188 (4 ),577-600

Hong K.; Kim J. (06-01-1995. )Natural mode analysis of hollow and annular elliptical cylindrical cavities.Journal of Sound and Vibration, ,183 (2 ),327-351

Kim J. (01-01-1990. )Development of a general procedure to formulate four pole parameters by modal expansion andits appli.Journal of Vibration and Acoustics, Transactions of the ASME, ,112 (4 ),452-459